2963747 Phoenix Contact Electrical Safety Devices

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Max. permissible relative humidity (operation)
  75 % (on average, 85% infrequently, non-condensing)
• Rated control circuit supply voltage US
  24 V AC/DC -15 % / +10 %
• Height
  114.5 mm
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Maximum altitude
  max. 2000 m (Above sea level)
• Recovery time
  < 500 ms
• Maximum switching frequency
  0.5 Hz
• Contact material
  AgSnO2
• Switching capacity according to IEC 60947-5-1
  3 A (24 V (DC13))
• Net weight
  150 g
• Connection method
  Screw connection
• Screw thread
  M3
• Category
  1
• Rated insulation voltage
  250 V
• Overvoltage category
  II
• Conformance
  CE-compliant
• ECLASS 4.1
  27371100
• ECLASS 7.0
  27371601
• ETIM 4.0
  EC001449
UNSPSC 12.01
39121501
Depth
99 mm
Input voltage range
20.4 V AC/DC ... 26.4 V AC/DC
Typ. starting time with Us
typ. 20 ms (when controlled via A1)
Protective circuit
Surge protection Varistor
Limiting continuous current
6 A (N/O contact)
Switching capacity
min. 50 mW
Degree of protection
IP20
Min. degree of protection of inst. location
IP54
Torque
0.6 Nm
Performance level (PL)
c
Standards/regulations
DIN EN 50178
Vibration (operation)
10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
ECLASS 11.0
27371819
ECLASS 6.0
27371600
ETIM 2.0
EC000196
UNSPSC 7.0901
39121501
UNSPSC 18.0
39122334
Width
22.5 mm
Rated control supply current IS
typ. 47 mA
Inrush current
typ. 350 mA DC (Δt < 1 µs at Us)
Maximum switching voltage
230 V AC/DC (Observe the load curve)
Interrupting rating (ohmic load) max.
144 W (N/O contact, 24 V DC, τ = 0 ms)
Mechanical service life
10x 106 cycles
Switching capacity (360/h cycles)
4 A (24 V (DC13))
Housing material
PBT
Conductor cross section solid
0.2 mm² ... 2.5 mm²
Stripping length
7 mm
Stop category
0
Degree of pollution
2
ECLASS 10.0.1
27371601
ECLASS 9.0
27371601
UNSPSC 6.01
30211901
UNSPSC 21.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Max. permissible humidity (storage/transport)
75 % (on average, 85% infrequently, non-condensing)
Typical release time
typ. 20 ms (when controlled via A1)
Operating voltage display
1 x green LED
Maximum inrush current
6 A
Maximum interrupting rating (inductive load)
42 W (N/O contact, 24 V DC, τ = 40 ms)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Mounting position
any
pluggable
Yes
Conductor cross-section AWG
24 ... 12
Designation
Air clearances and creepage distances between the power circuits
Safety Integrity Level Claim Limit (SIL CL)
1
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27371100
ECLASS 5.0
27371600
ETIM 3.0
EC001449
ETIM 7.0
EC001437
UNSPSC 11
39121501
UNSPSC 19.0
39122334
Power consumption at US
typ. 1.2 W
Contact type
5 enabling current paths
Minimum switching voltage
5 V AC/DC
Inrush current, minimum
10 mA
Sq. Total current
72 A2
Output fuse
10 A gL/gG (N/O contact)
Nominal operating mode
100% operating factor
Mounting type
DIN rail mounting
Housing color
yellow
Conductor cross section flexible
0.2 mm² ... 2.5 mm²
Safety Integrity Level (SIL)
1
Rated surge voltage/insulation
Safe isolation 4 kV between all current paths and housing
Shock
15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
ECLASS 5.1
27371600
ETIM 6.0
EC001437
UNSPSC 13.2
39121501
UNSPSC 20.0
39122334