2961163 Phoenix Contact Control Relays

Product Details

• Contact type
  1 changeover contact
• Pollution degree
  3
• ECLASS 10.0.1
  27371601
• Typical input current at UN
  14 mA
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 9.0
  27371601
• Nominal input voltage UN
  12 V DC
• Designation
  Corrosive gas test
• ECLASS 4.1
  27371100
• ECLASS 5.1
  27371600
• Overvoltage category
  III
• ECLASS 11.0
  27371601
• Typical release time
  2.5 ms
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 6.0
  27371600
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  5 ms
• Width
  5 mm
• Coil resistance
  848 Ω ±10 % (at 20 °C)
• Maximum switching voltage
  250 V AC/DC
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Operating mode
100% operating factor
Connection method
Solder connection
ETIM 7.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 85 °C
Input voltage range in reference to UN
see diagram
Power dissipation for nominal condition
0.17 W
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
2x 107 cycles
Assembly instructions
In rows with zero spacing
ECLASS 5.0
27371600
ETIM 6.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334
Height
28 mm
Contact material
AgSnO
Minimum switching voltage
5 V (at 100 mA)
Limiting continuous current
6 A
Mounting position
any
Connection in acc. with standard
CUL
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 21.0
39122334
Depth
15 mm
Degree of protection
RT III
Type of switch contact
Single contact
Maximum inrush current
50 mA
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Note
the following values are applicable if a gold layer is destroyed
Standards/regulations
IEC 60664
ETIM 2.0
EC001437
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515