2961150 Phoenix Contact Control Relays

Product Details

• Depth
  15 mm
• Limiting continuous current
  6 A
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Connection in acc. with standard
  CUL
• Height
  28 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range in reference to UN
  see diagram
• Typical release time
  2.5 ms
• Maximum switching voltage
  250 V AC/DC
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Operating mode
  100% operating factor
• Assembly instructions
  In rows with zero spacing
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 10.0.1
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 6.01
  30211916
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Width
  5 mm
Ambient temperature (operation)
-40 °C ... 85 °C
Degree of protection
RT III
Min. switching current
10 mA (at 12 V)
Maximum inrush current
10 A (4 s)
Motor load according to UL 508
1/4 HP, 240 - 277 V AC (N/O contact)
Mechanical service life
2x 107 cycles
Pollution degree
3
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Minimum switching voltage
5 V (at 100 mA)
Type of switch contact
Single contact
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Connection method
Solder connection
Standards/regulations
IEC 60664
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 6.0
EC001437
ETIM 3.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 18.0
39122334
UNSPSC 11
39121515
UNSPSC 20.0
39122334
ECLASS 4.1
27371100
Nominal input voltage UN
12 V DC
Typical response time
5 ms
Designation
Corrosive gas test
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27371600
Typical input current at UN
14 mA
Power dissipation for nominal condition
0.17 W
ECLASS 9.0
27371601
Coil resistance
848 Ω ±10 % (at 20 °C)
Contact type
1 changeover contact
Overvoltage category
III
ECLASS 5.0
27371600
Contact material
AgSnO
ECLASS 4.0
27371100
ECLASS 7.0
27371601
ETIM 7.0
EC001437