2910534 Phoenix Contact Control Relays

Product Details

• Mechanical service life
  5x 106 cycles
• Rated insulation voltage
  250 V AC
• Conductor cross section AWG
  26 ... 14
• Pollution degree
  2
• ECLASS 10.0.1
  27371601
• ECLASS 9.0
  27371601
• UNSPSC 6.01
  30211916
• UNSPSC 12.01
  39121515
• Depth
  104 mm
• Connection method
  Push-in connection
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27371600
• ETIM 3.0
  EC001437
• Width
  14 mm
• Nominal input voltage UN
  230 V AC
• Typical release time
  8 ms (220 V DC)
• Operating voltage display
  Yellow LED
• Stripping length
  8 mm
• Designation
  Corrosive gas test
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 11
39121515
UNSPSC 18.0
39122334
Ambient temperature (operation)
-20 °C ... 50 °C
Typical release time range
3 ms ... 15 ms (230 V AC)
Contact material
AgNi
Mounting position
any
Connection name
Contact side
Standards/regulations
EN 50178
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 7.0
27371601
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
UNSPSC 7.0901
39121515
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Maximum altitude
≤ 2000 m
Typical input current at UN
5 mA
Degree of protection
RT II (Relay)
Typical response time
6 ms (220 V DC)
Protective circuit
Bridge rectifier Bridge rectifier
Minimum switching voltage
12 V (10 mA)
Operating mode
100% operating factor
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Min. switching current
10 mA (at 12 V)
Limiting continuous current
10 A
Flammability rating according to UL 94
V0 (Housing)
Maximum inrush current
24 A (20 ms)
Interrupting rating (ohmic load) max.
264 W (24 V DC)
Height
80 mm
Contact type
1 changeover contact
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Switching capacity
2 A (24 V, DC13)