2910531 Phoenix Contact Control Relays

Product Details

• Depth
  104 mm
• Type of switch contact
  Single contact
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• ECLASS 11.0
  27371601
• ECLASS 5.1
  27371600
• ECLASS 7.0
  27371601
• UNSPSC 12.01
  39121515
• UNSPSC 6.01
  30211916
• UNSPSC 18.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Maximum altitude
  ≤ 2000 m
• Typical input current at UN
  18 mA
• Coil voltage
  24 V DC
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Switching capacity
  2 A (24 V, DC13)
• Assembly instructions
  In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
Pollution degree
2
ECLASS 6.0
27371600
ETIM 6.0
EC001437
ETIM 7.0
EC001437
UNSPSC 20.0
39122334
Degree of protection
RT II (Relay)
Typical release time range
3 ms ... 15 ms
Contact type
1 changeover contact
Minimum switching voltage
12 V (10 mA)
Interrupting rating (ohmic load) max.
264 W (24 V DC)
Mechanical service life
5x 106 cycles
Stripping length
8 mm
Designation
Corrosive gas test
UNSPSC 11
39121515
Height
80 mm
Ambient temperature (operation)
-20 °C ... 60 °C
Nominal input voltage UN
24 V AC/DC
Protective circuit
Bridge rectifier Bridge rectifier
Maximum inrush current
24 A (20 ms)
Limiting continuous current
10 A
Mounting position
any
Connection method
Push-in connection
Standards/regulations
EN 50178
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 21.0
39122334
Width
14 mm
Ambient temperature (storage/transport)
-20 °C ... 85 °C
Typical response time
3 ms ... 15 ms
Operating voltage display
Yellow LED
Contact material
AgNi
Min. switching current
10 mA (at 12 V)
Operating mode
100% operating factor
Connection name
Contact side
Insulation
Safe isolation, reinforced insulation
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ECLASS 9.0
27371601
ETIM 2.0
EC001437
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334