2910522 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Degree of protection
  RT II (Relay)
• Mechanical service life
  5x 106 cycles
• Depth
  104 mm
• Typical response time
  6 ms (110 V DC)
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Typical release time
  10 ms (110 V DC)
• Contact material
  AgNi
• Width
  14 mm
• Maximum altitude
  ≤ 2000 m
• Ambient temperature (operation)
  -20 °C ... 55 °C
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Typical release time range
  3 ms ... 15 ms (120 V AC)
• Protective circuit
  Bridge rectifier Bridge rectifier
• Min. switching current
  10 mA (12 V)
• Maximum inrush current
  12 A (20 ms)
• Flammability rating according to UL 94
  V0 (Housing)
• Conductor cross section AWG
  26 ... 14
• Standards/regulations
  EN 50178
• Overvoltage category
  III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
Nominal input voltage UN
120 V AC
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current
6 A
Interrupting rating (ohmic load) max.
192 W (24 V DC)
Operating mode
100% operating factor
Connection name
Contact side
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Insulation
Safe isolation, reinforced insulation
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121515
UNSPSC 13.2
39122334
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Rated insulation voltage
250 V AC
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
Typical input current at UN
5 mA
Operating voltage display
Yellow LED
Type of switch contact
Single contact
Minimum switching voltage
12 V (10 mA)
Switching capacity
1 A (24 V, DC13)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Rated surge voltage
6 kV
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334