2910517 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -20 °C ... 55 °C
• Typical release time range
  3 ms ... 15 ms (120 V AC)
• Operating voltage display
  Yellow LED
• ECLASS 11.0
  27371601
• ETIM 2.0
  EC001437
• ETIM 3.0
  EC001437
• UNSPSC 18.0
  39122334
• UNSPSC 21.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -20 °C ... 85 °C
• Maximum altitude
  ≤ 2000 m
• Contact material
  AgNi
• Protective circuit
  Bridge rectifier Bridge rectifier
• Interrupting rating (ohmic load) max.
  264 W (24 V DC)
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Connection method
  Screw connection
• Rated insulation voltage
  250 V AC
• REACh SVHC
  Lead 7439-92-1
• ECLASS 7.0
  27371601
• UNSPSC 12.01
  39121515
Width
14 mm
Degree of protection
RT II (Relay)
Typical response time
6 ms (110 V DC)
Contact type
1 changeover contact
Limiting continuous current
10 A
Flammability rating according to UL 94
V0 (Housing)
Stripping length
8 mm
Designation
Corrosive gas test
Insulation
Safe isolation, reinforced insulation
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ETIM 7.0
EC001437
UNSPSC 11
39121515
UNSPSC 13.2
39122334
Depth
104 mm
Nominal input voltage UN
120 V AC
Typical release time
8 ms (110 V DC)
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA (12 V)
Mechanical service life
5x 106 cycles
Assembly instructions
In rows with zero spacing
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ECLASS 5.0
27371600
UNSPSC 7.0901
39121515
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Height
80 mm
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 20.0
39122334
Screw thread
M3
Rated surge voltage
6 kV
Typical input current at UN
5 mA
Type of switch contact
Single contact
Switching capacity
2 A (24 V, DC13)
Mounting position
any
Conductor cross section AWG
26 ... 14
Maximum inrush current
24 A (20 ms)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
III
Minimum switching voltage
12 V (10 mA)
Operating mode
100% operating factor
Standards/regulations
EN 50178