2910120 Phoenix Contact DC/DC Converters

Product Details

• Weight
  0.8 kg
• ECLASS 10.0.1
  27210901
• Electric strength, max.
  35 V DC (60 s)
• Inrush current limitation typical
  1.5 A (after 1 ms)
• Type test (IEC/EN 60950-1) D
  0.5 kV DC
• Production test D
  0.5 kV DC
• Static Boost (IStat.Boost)
  12.5 A
• Conductor cross section AWG
  24 ... 16
• Typical current consumption
  13.8 A (24 V DC)
• Type test (IEC/EN 60950-1) B
  4 kV DC
• Stripping length
  8 mm
• System deviation, input voltage change
  < 0.1 % (change in input voltage ±10 %)
• Feedback voltage resistance
  ≤ 35 V DC
• UOut
  > 0.9 x USet (LED lights up green)
• Default
  Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
• Switch contact
  floating
• Main converter stage
  67 kHz ... 135 kHz (Main converter stage)
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Width with alternative assembly
  122 mm
• Depth with alternative assembly
  53 mm
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
Overvoltage category EN 61010-1
II
EMC requirements for noise immunity
EN 61000-6-1
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Frequency range
50 Hz ... 60 Hz
Comments
Criterion A
Input
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Voltage dips
EN 61000-4-29
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Attenuated oscillating wave
EN 61000-4-18
Criterion A
Normal operating behavior within the specified limits.
Input voltage range
18 V DC ... 32 V DC
Typical response time
300 ms (from SLEEP MODE)
Insulation voltage input/output
4 kV DC (type test)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Production test B
2 kV DC
Conductor cross section solid
0.2 mm² ... 1 mm²
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Residual ripple
< 50 mVPP
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Connection labeling
3.4 +
Reference potential
to OUT1, OUT2, REM
MTBF (IEC 61709, SN 29500)
> 1380000 h (25 °C)
Hood version
Stainless steel X6Cr17
Depth
125 mm
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Degree of pollution
2
EMC requirements for noise emission
EN 61000-6-3
Overvoltage category EN 62477-1
III
Identification
ABS
Conducted noise emission
EN 55016
Switch-on time
< 1 s
Type test (IEC/EN 60950-1) A
2 kV DC
Production test A
2 kV DC
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Nominal output voltage (UN)
24 V DC
Dynamic Boost (IDyn.Boost)
20 A (5 s)
System deviation, static
< 1 % (change in load, static 10 % ... 90 %)
No-load proof
yes
Rise time
< 1 s (UOUT (10 % ... 90 %))
POut
> 100 % (LED lights up yellow, output power > 240 W)
Signal option
Output current
Maximum contact load
24 V DC
Temperature
30 °C
Side element version
Aluminum
Protection class
Special with SELV input and output
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Ambient temperature (storage/transport)
-40 °C ... 85 °C
EMC requirements, power plant
IEC 61850-3
Designation
Shipbuilding
Noise emission
EN 55016
DNV GL noise radiation
Class B
Discharge in air
15 kV (Test Level 4)
Electromagnetic HF field
EN 61000-4-3
Surge voltage load (surge)
EN 61000-4-5
Frequency
0 Hz
Voltage dip
0 %
Test level 4
15 kHz 150 kHz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Input, output (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27210901
Mains buffering
typ. 11 ms (24 V DC)
Inrush current integral (I2t)
< 0.02 A2s
Input fuse
30 A (slow-blow, internal)
Production test C
0.5 kV DC
Connection method
Push-in connection
Conductor cross section flexible
0.2 mm² ... 1.5 mm²
Nominal output current (IN)
10 A
Magnetic circuit breaker tripping
A1...A6 / B2...B6 / C1...C3 / Z1...Z6
Short-circuit-proof
yes
Connection in series
yes
Types of signaling
LED
Analog
4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Output current
10 A
Voltage
1 kV
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Height
130 mm
Efficiency
typ. 93.3 % (24 V DC)
Maximum power dissipation in no-load condition
< 5 W
Power dissipation SLEEP MODE
< 2 W
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Climatic class
3K3 (EN 60721)
Standard designation
Mains variation/undervoltage
Standards/regulations
EN 61000-4-29
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL conducted interference
Class B
Additional text
Test Level 2
Fast transients (burst)
EN 61000-4-4
Output
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Damped oscillating magnetic field
EN 61000-4-10
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ETIM 7.0
EC002046
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Connection in parallel
Yes, for redundancy and increased capacity
UIn
> 0.8 x UInNom (LED off)
Digital
0 V DC
Function
Signal ground
Time
422400 h
Degree of protection
IP20
Width
50 mm
Height with alternative assembly
130 mm
Power loss nominal load max.
< 16 W
Maximum altitude
≤ 5000 mm (> 2000 m, observe derating)
Test level 1
15 Hz 150 Hz (Test Level 3)
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
ECLASS 11.0
27210901
Contact discharge
8 kV (Test Level 4)
Test field strength
100 A/m
Signal
2 kV (Test Level 3 - asymmetrical)
Power frequency magnetic field
EN 61000-4-8
Pulse-shape magnetic field
EN 61000-4-9
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
ETIM 6.0
EC002046