2910110 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 55 °C
• Typical input current at UN
  8.8 mA (50 Hz)
• Power dissipation for nominal condition
  2.3 W
• Minimum switching voltage
  5 V (100 mA)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
• Conductor cross section AWG
  26 ... 14
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 5.1
  27371600
• ECLASS 9.0
  27371601
• UNSPSC 6.01
  30211916
• UNSPSC 20.0
  39122334
• Width
  6.2 mm
• Typical release time
  20 ms
• Contact material
  AgSnO
• Limiting continuous current
  6 A
• Switching capacity
  2 A (at 24 V, DC13)
• Mounting position
  any
• Stripping length
  8 mm
• ECLASS 10.0.1
  27371601
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
Depth
94 mm
Nominal input voltage UN
230 V AC
Contact type
1 changeover contact
Min. switching current
10 mA (12 V)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
ECLASS 5.0
27371600
ECLASS 11.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121515
UNSPSC 19.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
80 mm
Degree of protection
IP20 (Relay base)
Input voltage range in reference to UN
0.78 ... 1.14
Protective circuit
Bridge rectifier
Type of switch contact
Single contact
Interrupting rating (ohmic load) max.
140 W (24 V DC)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
7 ms
Status display
Yellow LED
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Mechanical service life
2x 107 cycles
Connection method
Push-in connection
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 18.0
39122334