2909847 Phoenix Contact Control Relays

Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time range
  5 ms ... 20 ms
• Contact type
  4 changeover contacts
• Maximum switching voltage
  250 V AC/DC
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Mounting position
  any
• Conductor cross section solid
  0.5 mm² ... 4 mm²
• Conductor cross section AWG
  20 ... 10 (solid)
• Rated insulation voltage
  250 V AC
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ETIM 3.0
  EC001437
• ETIM 7.0
  EC001437
• UNSPSC 13.2
  39122334
• UNSPSC 21.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Input voltage range in reference to UN
  see diagram
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  120 W (at 24 V DC)
• Flammability rating according to UL 94
  V2 (Housing)
Conductor cross section flexible
0.5 mm² ... 4 mm²
Rated surge voltage
2.5 kV
Certificate
IECEx IBE 17.0032X
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
Depth
75 mm
Typical input current at UN
6.5 mA
Protective circuit
Varistor
Min. switching current
5 mA (at 24 V)
Mechanical service life
approx. 2x 107 cycles
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Standards/regulations
EN/IEC 60079-0
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 2.0
EC001437
UNSPSC 12.01
39121516
Width
27 mm
Ambient temperature (operation)
-40 °C ... 50 °C
Nominal input voltage UN
230 V AC
Typical response time
5 ms ... 15 ms
Coil voltage
230 V AC
Limiting continuous current
5 A (see diagram)
Switching capacity
2 A (at 24 V, DC13)
Connection method
Screw connection
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Insulation
Basic insulation
Overvoltage category
III
ECLASS 5.0
27371600
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
Height
89 mm
Degree of protection
IP20 (Relay base)
Mains frequency
50/60 Hz
Type of switch contact
Single contact
Minimum switching voltage
5 V (At 24 mA)
Maximum inrush current
16 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Connection name
Contact side
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Designation
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
UNSPSC 7.0901
39121516
UNSPSC 19.0
39122334