2909846 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -40 °C ... 50 °C
• Nominal input voltage UN
  120 V AC
• Typical input current at UN
  13 mA
• Coil voltage
  120 V AC
• Maximum switching voltage
  250 V AC/DC
• Interrupting rating (ohmic load) max.
  120 W (at 24 V DC)
• Limiting continuous current
  5 A (see diagram)
• Conductor cross section solid
  0.5 mm² ... 4 mm²
• Conductor cross section flexible (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Standards/regulations
  EN/IEC 60079-0
• Pollution degree
  2
• Designation
  Corrosive gas test
• ECLASS 5.1
  27371600
• ECLASS 9.0
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 12.01
  39121516
• UNSPSC 19.0
  39122334
• Height
  89 mm
• Mains frequency
  50/60 Hz
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (At 24 mA)
Switching capacity
2 A (at 24 V, DC13)
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Torque
0.5 Nm ... 0.6 Nm
Rated surge voltage
2.5 kV
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 7.0
27371601
Width
27 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
5 ms ... 15 ms
Protective circuit
Varistor
Type of switch contact
Single contact
Min. switching current
5 mA (at 24 V)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 2x 107 cycles
Connection method
Screw connection
Conductor cross section flexible
0.5 mm² ... 4 mm²
Conductor cross section AWG
20 ... 10 (solid)
Overvoltage category
III
Certificate
IECEx IBE 17.0032X
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Depth
75 mm
Degree of protection
IP20 (Relay base)
Input voltage range in reference to UN
see diagram
Typical release time range
5 ms ... 20 ms
Contact type
4 changeover contacts
Contact material
AgNi
Maximum inrush current
16 A (20 ms, N/O contacts)
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Connection name
Contact side
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
Basic insulation
ECLASS 11.0
27371601
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
UNSPSC 20.0
39122334
ETIM 6.0
EC001437
UNSPSC 7.0901
39121516
UNSPSC 11
39121516