2909773 Phoenix Contact Control Relays

Product Details

• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Limiting continuous current
  see diagram
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V2 (Housing)
• Connection method
  Screw connection
• Conductor cross section flexible
  0.5 mm² ... 4 mm²
• Rated surge voltage
  6 kV
• Width
  16 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  4 ms ... 10 ms
• Protective circuit
  Varistor
• Minimum switching voltage
  12 V (at 10 mA)
• Switching capacity
  1 A (at 24 V, DC13)
• Mechanical service life
  approx. 5x 106 cycles
• Assembly instructions
  In rows with zero spacing
• Conductor cross-section solid (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Identification
  ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ETIM 7.0
EC001437
Ambient temperature (operation)
-40 °C ... 45 °C
Typical release time range
3 ms ... 20 ms
Contact type
2 changeover contacts
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Operating mode
100% operating factor
Stripping length
8 mm
Conductor cross section AWG
20 ... 10 (solid)
Overvoltage category
III
ETIM 2.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Typical input current at UN
7 mA
Nominal input voltage UN
120 V AC
Contact material
AgNi
Maximum inrush current
16 A (20 ms, N/O contacts)
Service life, electrical
see diagram
Conductor cross section solid
0.5 mm² ... 4 mm²
Standards/regulations
DIN EN 50178
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
Height
89 mm
Degree of protection
IP20 (Relay base)
Mains frequency
50/60 Hz
Coil voltage
120 V AC
Maximum switching voltage
250 V AC/DC
Switching capacity min.
120 mW
Mounting position
any
Connection name
Contact side
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Insulation
safe isolation
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 6.0
EC001437
Torque
0.5 Nm ... 0.6 Nm
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 3.0
EC001437
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Min. switching current
10 mA (at 12 V)