2909741 Phoenix Contact Control Relays

Product Details

• Height
  96 mm
• Degree of protection
  IP20 (Relay base)
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  5 V (At 24 mA)
• Depth
  75 mm
• Nominal input voltage UN
  24 V DC
• Coil voltage
  24 V DC
• Type of switch contact
  Single contact
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  approx. 2x 107 cycles
• Assembly instructions
  In rows with zero spacing
• Stripping length
  8 mm
• ECLASS 5.0
  27371600
• ETIM 6.0
  EC001437
• UNSPSC 18.0
  39122334
• UNSPSC 19.0
  39122334
• Width
  31 mm
• Input voltage range in reference to UN
  see diagram
• Typical response time
  13 ms
• Protective circuit
  Damping diode
Contact type
4 changeover contacts
Min. switching current
5 mA (at 24 V)
Operating mode
100% operating factor
Conductor cross section AWG
26 ... 16 (solid)
Rated surge voltage
2.5 kV
Certificate
IECEx IBE 17.0032X
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
ETIM 2.0
EC001437
UNSPSC 11
39121516
UNSPSC 21.0
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Typical release time
14 ms
Contact material
AgNi
Limiting continuous current
6 A (see diagram)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Rated insulation voltage
250 V AC
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
UNSPSC 7.0901
39121516
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
42 mA
Power dissipation for nominal condition
1.01 W
Maximum switching voltage
250 V AC/DC
Maximum inrush current
16 A (20 ms, N/O contacts)
Mounting position
any
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Insulation
Basic insulation
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 3.0
EC001437
UNSPSC 6.01
30211917
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Flammability rating according to UL 94
V2 (Housing)
Connection method
Push-in connection
Standards/regulations
EN/IEC 60079-0
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ETIM 7.0
EC001437
UNSPSC 12.01
39121516