2909676 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Typical input current at UN
  3.2 mA (at UN = 230 V AC)
• Typical release time
  15 ms
• Type of switch contact
  Single contact
• Maximum switching voltage
  250 V AC/DC
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• UNSPSC 20.0
  39122334
• UNSPSC 19.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  RT III (Relay)
• Nominal input voltage UN
  230 V AC
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  5 V (at 100 mA)
• Note
  the following values are applicable if a gold layer is destroyed
• Operating mode
  100% operating factor
• Mounting position
  any
• Connection name
  Contact side
• Stripping length
  8 mm
• Pollution degree
  3
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ECLASS 5.0
27371600
ETIM 2.0
EC001437
Width
6.2 mm
Depth
94 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Protective circuit
Bridge rectifier Bridge rectifier
Power dissipation for nominal condition
0.74 W
Contact material
AgSnO, hard gold-plated
Limiting continuous current
6 A
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
ECLASS 11.0
27371601
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27371601
ETIM 4.0
EC001437
ETIM 6.0
EC001437
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
2x 107 cycles
Connection method
Push-in connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Ambient temperature (operation)
-40 °C ... 55 °C
Typical response time
7 ms
Contact type
1 changeover contact
Maximum inrush current
50 mA
ETIM 3.0
EC001437
UNSPSC 18.0
39122334