2909672 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Typical response time
  5 ms
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC
• Minimum switching voltage
  5 V (at 100 mA)
• Conformance
  CE-compliant
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 10.0.1
  27371601
• ETIM 2.0
  EC001437
• ETIM 6.0
  EC001437
• UNSPSC 19.0
  39122334
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  RT III (Relay)
• Typical release time
  8 ms
• Contact material
  AgSnO, hard gold-plated
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Operating mode
  100% operating factor
• Connection name
  Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ECLASS 9.0
27371601
UNSPSC 18.0
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Nominal input voltage UN
24 V DC
Contact type
1 changeover contact
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Note
the following values are applicable if a gold layer is destroyed
Overvoltage category
III
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Typical input current at UN
9 mA
Power dissipation for nominal condition
0.22 W
Type of switch contact
Single contact
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 3.0
EC001437
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Pollution degree
3
Limiting continuous current
6 A
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Connection method
Push-in connection
Standards/regulations
IEC 60664
Mechanical service life
2x 107 cycles
Stripping length
8 mm
Designation
Corrosive gas test
Protective circuit
Reverse polarity protection Polarity protection diode
Maximum inrush current
50 mA
Conductor cross section AWG
26 ... 14