2909668 Phoenix Contact Control Relays

Product Details

• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Protective circuit
  Bridge rectifier Bridge rectifier
• Type of switch contact
  Single contact
• Maximum inrush current
  10 A (4 s)
• Limiting continuous current
  6 A
• Mounting position
  any
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Conductor cross section AWG
  26 ... 14
• REACh SVHC
  Lead 7439-92-1
• Type of note
  Notes on operation
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Contact type
  1 changeover contact
• Power dissipation for nominal condition
  0.26 W
• Min. switching current
  10 mA (at 12 V)
• Operating mode
  100% operating factor
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Designation
  Corrosive gas test
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 6.0
  27371600
ETIM 4.0
EC001437
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Nominal input voltage UN
24 V AC/DC
Contact material
AgSnO
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
1x 107 cycles
Assembly instructions
In rows with zero spacing
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27371600
ECLASS 7.0
27371601
ETIM 3.0
EC001437
Typical input current at UN
11 mA (at UN = 24 V AC)
Flammability rating according to UL 94
V0 (Housing)
Connection method
Push-in connection
Pollution degree
3
ECLASS 10.0.1
27371601
UNSPSC 20.0
39122334
Height
80 mm
Typical response time
6 ms
Minimum switching voltage
5 V (at 100 mA)
Connection name
Contact side
Conformance
CE-compliant
ECLASS 5.1
27371600
ETIM 2.0
EC001437
Degree of protection
RT II (Relay)
Operating voltage display
Yellow LED
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Stripping length
8 mm
ECLASS 11.0
27371601
ECLASS 9.0
27371601
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
Width
6.2 mm
Typical release time
15 ms
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Standards/regulations
IEC 60664
ETIM 6.0
EC001437
UNSPSC 19.0
39122334