2909667 Phoenix Contact Control Relays

Product Details

• Depth
  94 mm
• Typical response time
  5 ms
• Contact type
  1 changeover contact
• Type of switch contact
  Single contact
• Limiting continuous current
  6 A
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Mounting position
  any
• Designation
  Corrosive gas test
• REACh SVHC
  Lead 7439-92-1
• ECLASS 5.0
  27371600
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Height
  80 mm
• Degree of protection
  RT II (Relay)
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Switching capacity
  2 A (at 24 V, DC13)
• Flammability rating according to UL 94
  V0 (Housing)
• Connection method
  Push-in connection
• Width
  6.2 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
Typical release time
8 ms
Min. switching current
10 mA (at 12 V)
Minimum switching voltage
5 V (at 100 mA)
Mechanical service life
1x 107 cycles
Connection name
Contact side
Conductor cross section AWG
26 ... 14
Conformance
CE-compliant
ECLASS 9.0
27371601
Type of note
Notes on operation
Ambient temperature (operation)
-40 °C ... 60 °C
Protective circuit
Reverse polarity protection Polarity protection diode
Power dissipation for nominal condition
0.22 W
Maximum inrush current
10 A (4 s)
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Overvoltage category
III
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
ETIM 4.0
EC001437
Nominal input voltage UN
24 V DC
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Typical input current at UN
9 mA
Assembly instructions
In rows with zero spacing
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 20.0
39122334
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Contact material
AgSnO
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Stripping length
8 mm
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
3
ECLASS 11.0
27371601
ETIM 6.0
EC001437
UNSPSC 21.0
39122334