2909666 Phoenix Contact Control Relays

Product Details

• Typical response time
  5 ms
• Power dissipation for nominal condition
  0.18 W
• Maximum inrush current
  10 A (4 s)
• Operating mode
  100% operating factor
• Standards/regulations
  IEC 60664
• ECLASS 11.0
  27371601
• ECLASS 10.0.1
  27371601
• ETIM 3.0
  EC001437
• ETIM 7.0
  EC001437
• UNSPSC 20.0
  39122334
• Degree of protection
  RT II (Relay)
• Operating voltage display
  Yellow LED
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
• Connection name
  Contact side
• Designation
  Corrosive gas test
• Overvoltage category
  III
• ECLASS 5.1
  27371600
• ETIM 2.0
  EC001437
• UNSPSC 18.0
  39122334
Nominal input voltage UN
12 V DC
Contact type
1 changeover contact
Limiting continuous current
6 A
Mounting position
any
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Conformance
CE-compliant
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Type of switch contact
Single contact
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
3
ECLASS 5.0
27371600
ECLASS 9.0
27371601
UNSPSC 13.2
39122334
Contact material
AgSnO
Min. switching current
10 mA (at 12 V)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
1x 107 cycles
Connection method
Push-in connection
Stripping length
8 mm
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 21.0
39122334
Type of note
Notes on operation
Ambient temperature (operation)
-40 °C ... 60 °C
Protective circuit
Reverse polarity protection Polarity protection diode
Note
Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Typical release time
8 ms
REACh SVHC
Lead 7439-92-1
Width
6.2 mm
Minimum switching voltage
5 V (at 100 mA)
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Depth
94 mm
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Height
80 mm
Typical input current at UN
15.3 mA