2909655 Phoenix Contact Control Relays

Product Details

• Width
  6.2 mm
• Degree of protection
  RT II (Relay)
• Typical response time
  5 ms
• Maximum switching voltage
  250 V AC/DC
• Type of switch contact
  Single contact
• Contact material
  AgSnO, hard gold-plated
• Note
  the following values are applicable if a gold layer is destroyed
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Stripping length
  8 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  9 mA
• Nominal input voltage UN
  24 V DC
• Contact type
  1 changeover contact
• Min. switching current
  10 mA (at 12 V)
• Maximum inrush current
  50 mA
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
• Height
  80 mm
• Ambient temperature (operation)
  -40 °C ... 60 °C
Power dissipation for nominal condition
0.22 W
Mechanical service life
2x 107 cycles
Screw thread
M3
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Pollution degree
3
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 6.0
EC001437
ETIM 7.0
EC001437
Depth
94 mm
Typical release time
8 ms
ECLASS 10.0.1
27371601
ECLASS 11.0
27371601
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 19.0
39122334
Connection method
Screw connection
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
UNSPSC 18.0
39122334
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 20.0
39122334
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (at 100 mA)
Limiting continuous current
6 A
Connection name
Contact side
Assembly instructions
In rows with zero spacing
Switching capacity
2 A (at 24 V, DC13)
Conductor cross section AWG
26 ... 14
Protective circuit
Reverse polarity protection Polarity protection diode
Operating mode
100% operating factor
Mounting position
any
Designation
Corrosive gas test