2909652 Phoenix Contact Control Relays

Product Details

• Depth
  94 mm
• Typical response time
  5 ms
• Contact type
  1 changeover contact
• Limiting continuous current
  6 A
• Maximum inrush current
  10 A (4 s)
• Mounting position
  any
• Stripping length
  8 mm
• Designation
  Corrosive gas test
• REACh SVHC
  Lead 7439-92-1
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Degree of protection
  RT II (Relay)
• Typical release time
  8 ms
• Operating voltage display
  Yellow LED
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Mechanical service life
  1x 107 cycles
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 7.0
  27371601
ETIM 6.0
EC001437
UNSPSC 20.0
39122334
Width
6.2 mm
Nominal input voltage UN
125 V DC
Power dissipation for nominal condition
0.22 W
Minimum switching voltage
5 V (at 100 mA)
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross section AWG
26 ... 14
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 9.0
27371601
UNSPSC 13.2
39122334
Height
80 mm
Ambient temperature (operation)
-40 °C ... 55 °C
Protective circuit
Reverse polarity protection Polarity protection diode
Contact material
AgSnO
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Connection name
Contact side
Screw thread
M3
Pollution degree
3
ECLASS 5.1
27371600
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
3 mA
Type of switch contact
Single contact
Min. switching current
10 mA (at 12 V)
Operating mode
100% operating factor
Switching capacity
2 A (at 24 V, DC13)
Connection method
Screw connection
Standards/regulations
IEC 60664
Overvoltage category
III
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 3.0
EC001437
UNSPSC 21.0
39122334
ECLASS 5.0
27371600
ETIM 4.0
EC001437
ETIM 2.0
EC001437
UNSPSC 18.0
39122334