2909651 Phoenix Contact Control Relays

Product Details

• Stripping length
  8 mm
• Standards/regulations
  IEC 60664
• Overvoltage category
  III
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Ambient temperature (operation)
  -40 °C ... 55 °C
• Typical input current at UN
  3.5 mA (at UN = 120 V AC)
• Type of switch contact
  Single contact
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Connection method
  Screw connection
• Conductor cross section solid
  0.14 mm² ... 2.5 mm²
• Conductor cross section AWG
  26 ... 14
• REACh SVHC
  Lead 7439-92-1
• ECLASS 11.0
  27371601
• ECLASS 9.0
  27371601
• ETIM 3.0
  EC001437
• UNSPSC 19.0
  39122334
• Width
  6.2 mm
• Degree of protection
  RT II (Relay)
Protective circuit
Bridge rectifier Bridge rectifier
Power dissipation for nominal condition
0.42 W
Limiting continuous current
6 A
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Pollution degree
3
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 7.0
EC001437
Type of note
Notes on operation
Typical response time
6 ms
Contact type
1 changeover contact
Minimum switching voltage
5 V (at 100 mA)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Screw thread
M3
Designation
Corrosive gas test
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 18.0
39122334
ECLASS 7.0
27371601
ETIM 6.0
EC001437
UNSPSC 20.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical release time
15 ms
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Mounting position
any
Depth
94 mm
Mechanical service life
1x 107 cycles
Height
80 mm
Nominal input voltage UN
120 V AC
Operating voltage display
Yellow LED
Contact material
AgSnO
Maximum inrush current
10 A (4 s)