2909650 Phoenix Contact Control Relays

Product Details

• Note
  Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Protective circuit
  Bridge rectifier Bridge rectifier
• Contact material
  AgSnO
• Min. switching current
  10 mA (at 12 V)
• Operating mode
  100% operating factor
• Mechanical service life
  1x 107 cycles
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• ECLASS 5.0
  27371600
• ETIM 2.0
  EC001437
• UNSPSC 13.2
  39122334
• Depth
  94 mm
• Nominal input voltage UN
  24 V AC/DC
• Typical release time
  15 ms
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Interrupting rating (ohmic load) max.
  140 W (at 24 V DC)
• Stripping length
  8 mm
• Assembly instructions
  In rows with zero spacing
• Designation
  Corrosive gas test
• ECLASS 7.0
  27371601
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Width
6.2 mm
Typical input current at UN
11 mA (at UN = 24 V AC)
Power dissipation for nominal condition
0.26 W
Minimum switching voltage
5 V (at 100 mA)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Screw thread
M3
Connection name
Contact side
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (operation)
-40 °C ... 60 °C
Typical response time
6 ms
Operating voltage display
Yellow LED
Contact type
1 changeover contact
Maximum inrush current
10 A (4 s)
Flammability rating according to UL 94
V0 (Housing)
Connection method
Screw connection
Conductor cross section AWG
26 ... 14
Identification
ISA-S71.04. G3 Harsh Group
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 20.0
39122334
Type of note
Notes on operation
Height
80 mm
Degree of protection
RT II (Relay)
Type of switch contact
Single contact
Switching capacity
2 A (at 24 V, DC13)
Limiting continuous current
6 A
Mounting position
any
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Overvoltage category
III
ECLASS 6.0
27371600
ECLASS 11.0
27371601
ETIM 4.0
EC001437
UNSPSC 18.0
39122334
Pollution degree
3
China RoHS
Environmentally Friendly Use Period = 50 years