2909532 Phoenix Contact Control Relays

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Typical input current at UN
  18 mA
• Protective circuit
  Reverse polarity protection Polarity protection diode
• Contact material
  AgNi
• Min. switching current
  10 mA (at 12 V)
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  3x 107 cycles
• Assembly instructions
  In rows with zero spacing
• Insulation
  Safe isolation, reinforced insulation
• Overvoltage category
  III
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27371601
• ETIM 3.0
  EC001437
• UNSPSC 19.0
  39122334
• Width
  14 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  8 ms
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Flammability rating according to UL 94
  V0 (Housing)
Stripping length
8 mm
Rated insulation voltage
250 V AC
REACh SVHC
Lead 7439-92-1
Depth
94 mm
Operating voltage display
Yellow LED
Contact type
1 changeover contact
Minimum switching voltage
12 V DC (at 10 mA)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Operating mode
100% operating factor
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.0
27371600
ECLASS 7.0
27371601
UNSPSC 11
39121515
UNSPSC 18.0
39122334
Ambient temperature (operation)
-20 °C ... 60 °C (UL)
Degree of protection
RT III (Relay)
Typical release time
10 ms
Power dissipation for nominal condition
0.43 W
Limiting continuous current
10 A
Mounting position
any
Connection method
Push-in connection
Standards/regulations
IEC 60664
Rated surge voltage
6 kV
Certificate
IECEx IBE 16.0029X
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Height
80 mm
Nominal input voltage UN
24 V DC
Type of switch contact
Single contact
Maximum inrush current
30 A (300 ms)
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 20.0
39122334
ECLASS 5.1
27371600
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
ETIM 7.0
EC001437
UNSPSC 12.01
39121515