2909531 Phoenix Contact Control Relays

Product Details

• Width
  14 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical response time
  8 ms
• Type of switch contact
  Single contact
• Contact material
  AgNi
• Maximum switching voltage
  250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
• Interrupting rating (ohmic load) max. bridged
  144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
• Mechanical service life
  3x 107 cycles
• Connection name
  Contact side
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Insulation
  Safe isolation, reinforced insulation
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27371600
• UNSPSC 7.0901
  39121515
• UNSPSC 11
  39121515
• UNSPSC 20.0
  39122334
• ETIM 6.0
  EC001437
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 60 °C (UL)
• Nominal input voltage UN
  12 V DC
Contact type
1 changeover contact
Minimum switching voltage
12 V AC/DC
Limiting continuous current
10 A
Switching capacity
2 A (at 24 V, DC13)
Mounting position
any
Connection method
Push-in connection
Designation
Corrosive gas test
Rated surge voltage
6 kV
Pollution degree
2
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
Depth
94 mm
Typical release time
10 ms
Operating voltage display
Yellow LED
Power dissipation for nominal condition
0.4 W
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Flammability rating according to UL 94
V0 (Housing)
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Conductor cross section AWG
26 ... 14
Rated insulation voltage
250 V AC
Certificate
IECEx IBE 16.0029X
ECLASS 9.0
27371601
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
Height
80 mm
Degree of protection
RT III (Relay)
Typical input current at UN
33 mA
Protective circuit
Reverse polarity protection Polarity protection diode
Min. switching current
100 mA
Maximum inrush current
30 A (300 ms)
Operating mode
100% operating factor
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Standards/regulations
IEC 60664
Overvoltage category
III
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 19.0
39122334
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 7.0
EC001437