2909522 Phoenix Contact Control Relays

Product Details

• Height
  80 mm
• Degree of protection
  IP20 (Relay base)
• Typical release time
  8 ms
• Contact type
  1 changeover contact
• Limiting continuous current
  6 A
• Switching capacity
  2 A (at 24 V, DC13)
• Mechanical service life
  2x 107 cycles
• Mounting position
  any
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Standards/regulations
  IEC 60664
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 11.0
  27371601
• ECLASS 7.0
  27371601
• ETIM 3.0
  EC001437
• ETIM 7.0
  EC001437
• UNSPSC 18.0
  39122334
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (operation)
  -20 °C ... 60 °C (UL)
• Typical input current at UN
  15.3 mA
• Protective circuit
  Reverse polarity protection Polarity protection diode
Type of switch contact
Single contact
Minimum switching voltage
5 V (at 100 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Screw thread
M3
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Overvoltage category
III
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
12 V DC
Typical response time
5 ms
Power dissipation for nominal condition
0.18 W
Contact material
AgSnO
Maximum inrush current
10 A (4 s)
Test voltage
4 kV AC (50 Hz, 1 min., winding/contact)
Assembly instructions
In rows with zero spacing
Stripping length
8 mm
Designation
Corrosive gas test
Certificate
IECEx IBE 16.0029X
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27371600
ETIM 2.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 20.0
39122334
Width
6.2 mm
Depth
94 mm
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Min. switching current
10 mA (at 12 V)
Flammability rating according to UL 94
V0 (Housing)
Connection name
Contact side
Connection method
Screw connection
Conductor cross section AWG
26 ... 14
Pollution degree
3
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27371600
ETIM 4.0
EC001437
UNSPSC 11
39121515
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
UNSPSC 6.01
30211916
UNSPSC 19.0
39122334