2909518 Phoenix Contact Control Relays

Product Details

• Depth
  94 mm
• Typical input current at UN
  33 mA
• Height
  80 mm
• Degree of protection
  RT III (Relay)
• Protective circuit
  Reverse polarity protection Polarity protection diode
• Contact type
  1 changeover contact
• Minimum switching voltage
  12 V AC/DC
• Maximum inrush current
  30 A (300 ms)
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection method
  Screw connection
• Designation
  Corrosive gas test
• Rated surge voltage
  6 kV
• Ambient temperature (operation)
  -20 °C ... 60 °C (UL)
• Typical release time
  10 ms
• Operating voltage display
  Yellow LED
• Min. switching current
  10 mA (at 12 V)
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Operating mode
  100% operating factor
• Mounting position
  any
• Stripping length
  8 mm
Screw thread
M3
Conductor cross section AWG
26 ... 14
Overvoltage category
III
Certificate
IECEx IBE 16.0029X
ECLASS 11.0
27371601
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 11
39121515
UNSPSC 20.0
39122334
UNSPSC 19.0
39122334
Width
14 mm
Nominal input voltage UN
12 V DC
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
8 ms
Type of switch contact
Single contact
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Interrupting rating (ohmic load) max. bridged
144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.)
Flammability rating according to UL 94
V0 (Housing)
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Standards/regulations
IEC 60664
Identification
ISA-S71.04. G3 Harsh Group
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27371600
ECLASS 10.0.1
27371601
ETIM 3.0
EC001437
ETIM 4.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 18.0
39122334
Power dissipation for nominal condition
0.4 W
Contact material
AgNi
Limiting continuous current
10 A
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
3x 107 cycles
Connection name
Contact side
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated insulation voltage
250 V AC
Pollution degree
2
Insulation
Safe isolation, reinforced insulation
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27371600
ECLASS 9.0
27371601
ECLASS 7.0
27371601
ETIM 7.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 21.0
39122334
UNSPSC 13.2
39122334