2909512 Phoenix Contact Control Relays

Product Details

• Power dissipation for nominal condition
  1.04 W
• Maximum inrush current
  15 A (300 ms)
• Flammability rating according to UL 94
  V0 (Housing)
• Connection method
  Screw connection
• Conductor cross section AWG
  26 ... 14
• Rated surge voltage
  6 kV
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.1
  27371600
• Width
  14 mm
• Typical response time
  7 ms
• Operating voltage display
  Yellow LED
• Contact material
  AgNi
• Test voltage
  4 kV AC (50 Hz, 1 min., winding/contact)
• Connection name
  Contact side
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Pollution degree
  2
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 10.0.1
  27371601
• ETIM 2.0
  EC001437
• ETIM 7.0
  EC001437
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Height
80 mm
Degree of protection
RT III (Relay)
Typical release time
10 ms
Type of switch contact
Single contact
Minimum switching voltage
5 V AC/DC (at 10 mA)
Interrupting rating (ohmic load) max.
140 W (at 24 V DC)
Operating mode
100% operating factor
Stripping length
8 mm
Standards/regulations
IEC 60664
Rated insulation voltage
250 V AC
Insulation
Safe isolation, reinforced insulation
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334
Depth
94 mm
Ambient temperature (operation)
-20 °C ... 60 °C (UL)
Typical input current at UN
4.5 mA (UN = 230 V AC)
Protective circuit
Bridge rectifier Bridge rectifier
Min. switching current
10 mA (At 5 V)
Limiting continuous current
6 A
Mounting position
any
Assembly instructions
In rows with zero spacing
Screw thread
M3
Overvoltage category
III
Certificate
IECEx IBE 16.0029X
ECLASS 6.0
27371600
ETIM 6.0
EC001437
UNSPSC 18.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
230 V AC
Contact type
2 changeover contacts
Maximum switching voltage
250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Switching capacity
2 A (at 24 V, DC13)
Mechanical service life
3x 107 cycles
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Designation
Corrosive gas test
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371601
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
ECLASS 7.0
27371601
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334