2909211 Phoenix Contact Control Relays

Product Details

• Depth
  54.4 mm
• Nominal input voltage UN
  12 V DC
• Protective circuit
  Damping diode
• Contact material
  AgNi
• Type of switch contact
  Single contact
• Height
  35 mm
• Rated insulation voltage
  250 V AC
• Insulation
  Basic insulation
• Designation
  Corrosive gas test
• ECLASS 5.1
  27371601
• ETIM 6.0
  EC001437
• Type of note
  Notes on operation
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Degree of protection
  RT I
• Typical release time
  20 ms
• Status display
  Yellow LED
• Voltage type for actuation
  DC
• Contact type
  3 changeover contacts
• Maximum inrush current
  30 A (20 ms, N/O contacts)
• ETIM 2.0
  EC001437
Note
Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
112 mA
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 4.0
EC001437
ETIM 7.0
EC001437
Width
35 mm
Maximum altitude
≤ 2000 m
Typical response time
18 ms
Coil resistance
110 Ω ±10 %
Power dissipation for nominal condition
1.44 W
Maximum switching voltage
250 V DC
Limiting continuous current
10 A
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Motor load according to UL 508
1/2 HP, 240 V AC (N/O contact)
Operating mode
100% operating factor
Standards/regulations
IEC 60664
Rated surge voltage
4 kV
Identification
ISA-S71.04. G3 Harsh Group
Pollution degree
3
ECLASS 5.0
27371601
ECLASS 6.0
27371601
ETIM 3.0
EC001437
Min. switching current
10 mA (at 24 V)
Minimum switching voltage
10 V (At 24 mA)
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Connection method
Plug connection
Mechanical service life
approx. 2x 107 cycles
Mounting position
any
Overvoltage category
III
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27371601
ECLASS 9.0
27371601