2909207 Phoenix Contact Control Relays

Product Details

• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 10.0.1
  27371601
• ETIM 3.0
  EC001437
• Note
  Do not use to separate SELV / PELV circuits from other circuits, because safe isolation is not guaranteed.
• Depth
  54.4 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Degree of protection
  RT I
• Protective circuit
  Damping diode
• Contact type
  3 changeover contacts
• Minimum switching voltage
  10 V (At 24 mA)
• Maximum inrush current
  30 A (20 ms, N/O contacts)
• Motor load according to UL 508
  1/2 HP, 240 V AC (N/O contact)
• Standards/regulations
  IEC 60664
• Pollution degree
  3
• ECLASS 11.0
  27371601
• ECLASS 7.0
  27371601
• ETIM 7.0
  EC001437
• Typical response time
  18 ms
• Voltage type for actuation
  DC
• Type of switch contact
  Single contact
Limiting continuous current
10 A
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Insulation
Basic insulation
Designation
Corrosive gas test
ECLASS 5.0
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
Type of note
Notes on operation
Height
35 mm
Maximum altitude
≤ 2000 m
Nominal input voltage UN
125 V DC
Typical release time
20 ms
Power dissipation for nominal condition
1.44 W
Maximum switching voltage
250 V DC
Interrupting rating (ohmic load) max.
240 W (at 24 V DC)
Mechanical service life
approx. 2x 107 cycles
Connection method
Plug connection
Rated surge voltage
4 kV
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27371601
ETIM 4.0
EC001437
Width
35 mm
Ambient temperature (operation)
-40 °C ... 70 °C
Typical input current at UN
14 mA
Status display
Yellow LED
Contact material
AgNi
Min. switching current
10 mA (at 24 V)
Operating mode
100% operating factor
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 6.0
27371601
ETIM 2.0
EC001437