2908898 Phoenix Contact Control Relays

Product Details

• Height
  35 mm
• Contact material
  AgNi
• Switching capacity min.
  0.24 W
• Min. switching current
  10 mA (at 24 V)
• Width
  35 mm
• Status display
  Yellow LED
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Type of switch contact
  Single contact
• Switching capacity
  2 A (at 24 V, DC13)
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Contact type
  3 changeover contacts
• Maximum switching voltage
  250 V AC/DC
• Mechanical service life
  approx. 2x 107 cycles
• Standards/regulations
  IEC 60664
• Rated surge voltage
  4 kV
• Designation
  Corrosive gas test
• ECLASS 7.0
  27371601
• Mounting position
  any
• Insulation
  Basic insulation
ECLASS 10.0.1
27371601
ECLASS 6.0
27371600
ETIM 3.0
EC001437
UNSPSC 6.01
30211916
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
18 ms
Limiting continuous current
10 A
Rated insulation voltage
250 V AC
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 11
39121515
UNSPSC 20.0
39122334
Input voltage range in reference to UN
see diagram
Maximum inrush current
30 A (20 ms, N/O contacts)
Connection method
Plug connection
ECLASS 11.0
27371601
ETIM 2.0
EC001437
UNSPSC 12.01
39121515
Nominal input voltage UN
110 V DC
Pollution degree
3
Overvoltage category
III
ECLASS 9.0
27371601
Degree of protection
RT I
Typical release time
20 ms
Minimum switching voltage
10 V (At 24 mA)
Operating mode
100% operating factor
China RoHS
Environmentally Friendly Use Period = 50 years
ETIM 7.0
EC001437
Depth
54.4 mm
Protective circuit
Damping diode
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
UNSPSC 7.0901
39121515
UNSPSC 19.0
39122334
ETIM 6.0
EC001437
UNSPSC 13.2
39122334