2908501 Phoenix Contact Control Relays

Product Details

• Connection method
  Screw connection
• Conductor cross-section solid (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
• Rated surge voltage
  6 kV
• Pollution degree
  2
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Type of note
  Notes on operation
• Note
  FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Nominal input voltage UN
  12 V DC
• Degree of protection
  IP20 (Relay base)
• Typical response time
  8 ms
• Contact type
  2 changeover contacts
• Contact material
  AgNi
• Maximum switching voltage
  250 V AC/DC
• Maximum inrush current
  25 A (20 ms, N/O contacts)
• Switching capacity
  2 A (at 24 V, DC13)
• Flammability rating according to UL 94
  V2 (Housing)
• Assembly instructions
  In rows with zero spacing
• Conductor cross section solid
  0.5 mm² ... 4 mm²
• Conductor cross section flexible (2 conductors with same cross section)
  0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Conductor cross section AWG
20 ... 10 (solid)
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
Designation
Corrosive gas test
ECLASS 6.0
27371600
ETIM 3.0
EC001437
UNSPSC 7.0901
39121516
ETIM 7.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
89 mm
Width
16 mm
Input voltage range in reference to UN
see diagram
Typical release time
10 ms
Protective circuit
Damping diode
Operating voltage display
Yellow LED
Minimum switching voltage
5 V (at 10 mA)
Limiting continuous current
8 A (see diagram)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Connection name
Contact side
Stripping length
8 mm
Depth
75 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
33 mA
Coil voltage
12 V DC
Type of switch contact
Single contact
Min. switching current
10 mA (At 5 V)
Operating mode
100% operating factor
Mechanical service life
approx. 3x 107 cycles
Service life, electrical
see diagram
Conductor cross section flexible
0.5 mm² ... 4 mm²
Standards/regulations
DIN EN 50178
Insulation
Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
Overvoltage category
III
ECLASS 11.0
27371601
ECLASS 9.0
27371601
ETIM 6.0
EC001437
UNSPSC 6.01
30211917
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
ECLASS 5.1
27371600
ECLASS 7.0
27371601
ETIM 2.0
EC001437
UNSPSC 11
39121516
UNSPSC 20.0
39122334
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 13.2
39122334
UNSPSC 21.0
39122334