2908332 Phoenix Contact Control Relays

Product Details

• Width
  31 mm
• Minimum switching voltage
  5 V (At 24 mA)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical input current at UN
  42 mA
• Type of switch contact
  Single contact
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  144 W (at 24 V DC)
• Mechanical service life
  approx. 2x 107 cycles
• Connection method
  Push-in connection
• Rated insulation voltage
  250 V AC
• Conductor cross section flexible
  0.14 mm² ... 1.5 mm²
• Overvoltage category
  II
• ECLASS 10.0.1
  27371601
• ECLASS 7.0
  27371601
• ETIM 3.0
  EC001437
• ETIM 7.0
  EC001437
• UNSPSC 12.01
  39121516
• UNSPSC 19.0
  39122334
• Depth
  75 mm
• Input voltage range in reference to UN
  see diagram
Protective circuit
Damping diode
Contact type
4 changeover contacts
Maximum switching voltage
250 V AC/DC
Limiting continuous current
6 A
Test voltage
2.5 kVrms (50 Hz, 1 min., winding/contact)
Mounting position
any
Stripping length
8 mm
Insulation
Basic insulation
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 2.0
EC001437
ECLASS 9.0
27371601
ETIM 4.0
EC001437
UNSPSC 11
39121516
UNSPSC 7.0901
39121516
UNSPSC 20.0
39122334
Height
96 mm
Ambient temperature (operation)
-40 °C ... 60 °C
Nominal input voltage UN
24 V DC
Status display
Yellow LED
Note
the following values are applicable if a gold layer is destroyed
Switching capacity min.
48 mW
Operating mode
100% operating factor
Connection name
Contact side
Rated surge voltage
2.5 kV
Designation
Corrosive gas test
ECLASS 5.0
27371600
ECLASS 5.1
27371600
ETIM 6.0
EC001437
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Degree of protection
IP20 (Relay base)
Typical response time
13 ms
Power dissipation for nominal condition
1.01 W
Typical release time
14 ms
Min. switching current
5 mA (at 24 V)
Maximum inrush current
16 A (20 ms, N/O contacts)
Flammability rating according to UL 94
V2 (Housing)
Assembly instructions
In rows with zero spacing
Standards/regulations
DIN EN 50178
Pollution degree
2
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 6.0
27371600
UNSPSC 6.01
30211917
UNSPSC 13.2
39122334
Switching capacity
2 A (at 24 V, DC13)
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
26 ... 16 (solid)