2908047 Phoenix Contact Control Relays

Product Details

• Height
  36.1 mm
• Input voltage range in reference to UN
  see diagram
• Maximum switching voltage
  440 V AC
• Switching capacity min.
  120 mW
• Service life, electrical
  see diagram
• Identification
  ISA-S71.04. G3 Harsh Group
• ECLASS 11.0
  27371601
• ECLASS 6.0
  27371600
• ECLASS 9.0
  27371601
• UNSPSC 7.0901
  39121515
• UNSPSC 21.0
  39122334
• Depth
  45.5 mm
• Degree of protection
  RT I
• Typical input current at UN
  12 mA
• Power dissipation for nominal condition
  2.76 W
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  384 W (at 24 V DC)
• Mechanical service life
  approx. 2x 107 cycles
• Mounting position
  any
• Rated surge voltage
  4 kV
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 20.0
39122334
Width
38.6 mm
Nominal input voltage UN
230 V AC
Typical release time range
5 ms ... 18 ms (depending on phase relation)
Type of switch contact
Single contact
Maximum inrush current
50 A (20 ms)
Limiting continuous current
16 A
Standards/regulations
IEC 60664
ECLASS 10.0.1
27371601
ECLASS 5.1
27371600
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical response time
5 ms ... 25 ms (depending on phase relation)
Minimum switching voltage
5 V (At 24 mA)
Test voltage
2.5 kV (50 Hz, 1 min., winding/contact)
Connection method
Plug connection
Pollution degree
3
ECLASS 4.1
27371100
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 11
39121515
UNSPSC 18.0
39122334
Ambient temperature (operation)
-40 °C ... 70 °C
Mains frequency
50/60 Hz
Contact type
1 N/O contact
Min. switching current
5 mA (at 24 V)
Switching capacity
1 A (220 V, DC13)
Operating mode
100% operating factor
Designation
Corrosive gas test
Overvoltage category
III
ECLASS 4.0
27371100
UNSPSC 6.01
30211916
UNSPSC 12.01
39121515
UNSPSC 13.2
39122334