2907076 Phoenix Contact UPS (DC)

Product Details

• Weight
  0.6 kg
• Height
  130 mm
• Depth with alternative assembly
  42 mm
• Installation distance top/bottom (active, passive)
  40 mm / 20 mm (POut ≤50 %)
• Max. permissible relative humidity (operation)
  ≤ 95 % (at 25 °C, non-condensing)
• Installation height
  ≤ 4000 m
• Reverse polarity protection
  yes
• Fixed backup threshold
  22 V DC
• Switch-over time
  0 ms
• Width
  40 mm
• Installation distance right/left (active)
  5 mm / 5 mm (POut ≥50% )
• Ambient temperature (start-up type tested)
  -40 °C
• Climatic class
  3K3 (EN 60721)
• Short-circuit-proof
  yes
• Efficiency
  typ. 97 %
• End-of-charge voltage (temperature-compensated)
  25 V DC ... 32 V DC
• Charging time
  202.5 h
• MTBF (IEC 61709, SN 29500)
  > 1172000 h (25 °C)
• Single conductor/terminal point, stranded, with ferrule, max.
  4 mm²
• Tightening torque max
  0.6 Nm
Designation
CB scheme
Test field strength
300 A/m
Signal
1 kV (Test Level 2 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.1
27242213
UNSPSC 19.0
39121011
Installation distance right/left (passive)
0 mm / 0 mm (POut ≥50% )
Height with alternative assembly
130 mm
Degree of protection
IP20
Degree of pollution
2
Input voltage range
18 V DC ... 30 V DC
Electric strength, max.
35 V DC
UPS connection in parallel
no
Energy storage device connection in parallel
Yes, 5 (observe line protection)
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Nominal capacity (without additional charger)
3 Ah ... 100 Ah
Charge characteristic curve
IU0U
Life expectancy (electrolytic capacitors)
192072 h
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Stripping length
6.5 mm
EMC requirements for noise immunity
EN 61000-6-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Input
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Depth
125 mm
Installation distance top/bottom (passive)
40 mm / 20 mm (POut ≥50% )
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Internal input fuse
no
Voltage drop, input/output
0.4 V DC
Output voltage range
19 V DC ... 32 V DC
Switch-on time
max. 3 s
No-load proof
yes
Battery technology
VRLA, VRLA-WTR, LI-ION
Charging current (configurable)
5 A
Buffer time
19 min. (12 Ah)
Environmental protection directive
RoHS Directive 2011/65/EU
Single conductor/terminal point, stranded, with ferrule, min.
0.2 mm²
Conductor cross section AWG max.
12
Conductor cross section AWG min.
30
Identification
IEC 61010-1
Comments
Criterion A
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
ECLASS 9.0
27040705
Installation distance top/bottom (active)
50 mm / 50 mm (POut ≥50% )
Energy storage device connection in series
no
Selective Fuse Breaking (ISFB)
120 A (15 ms)
Max. capacity
135 Ah
Deep discharge protection
19.2 V DC
Conductor cross section solid max.
2.5 mm²
Discharge in air
15 kV (Test Level 4)
Frequency range
50 Hz ... 60 Hz
Additional text
DC, 60 s
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC000382
UNSPSC 20.0
39121011
UNSPSC 21.0
39121011
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Inrush current
≤ 8 A (≤ 4 ms)
UPS connection in series
no
End-of-charge voltage
32 V DC
Temperature sensor
yes
Tightening torque, min
0.5 Nm
EMC requirements for noise emission
EN 61000-6-3
Standards/regulations
IEC 61010-1 (SELV)
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Frequency
0 Hz
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040705
Width with alternative assembly
123 mm
Installation distance right/left (active, passive)
0 mm / 0 mm (POut ≤50 %)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Input voltage
24 V DC
Static Boost (IStat.Boost)
25 A
Temperature compensation (configurable)
42 mV/K
IQ-Technology
yes
Connection method
Screw connection
Conductor cross section flexible max.
2.5 mm²
Standard designation
Safety extra-low voltage
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Voltage
10 V (Test Level 3)
Power frequency magnetic field
EN 61000-4-8
ECLASS 11.0
27040705
ETIM 7.0
EC000382
UNSPSC 13.2
39121004
UNSPSC 18.0
39121011