2907071 Phoenix Contact UPS (DC)

Product Details

• Weight
  0.6 kg
• Height with alternative assembly
  130 mm
• Installation distance right/left (active)
  5 mm / 5 mm (POut ≥50% )
• Degree of protection
  IP20
• Ambient temperature (start-up type tested)
  -40 °C
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Internal input fuse
  no
• Short-circuit-proof
  yes
• Energy storage device connection in parallel
  Yes, 5 (observe line protection)
• Dynamic Boost (IDyn.Boost)
  30 A (5 s)
• Nominal capacity (without additional charger)
  3 Ah ... 135 Ah
• Buffer time
  22 min. (12 Ah)
• Temperature sensor
  yes
• Single conductor/terminal point, stranded, with ferrule, min.
  0.2 mm²
• Conductor cross section flexible max.
  4 mm²
• Stripping length
  8 mm
• EMC requirements for noise emission
  EN 61000-6-3
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Comments
  Criterion A
• Height
  130 mm
Depth with alternative assembly
42 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (EN 60721)
Electric strength, max.
35 V DC (Protected against polarity reversal)
No-load proof
yes
UPS connection in series
no
Static Boost (IStat.Boost)
25 A
End-of-charge voltage (temperature-compensated)
25 V DC ... 32 V DC
Charge characteristic curve
IU0U
Single conductor/terminal point, stranded, with ferrule, max.
4 mm²
Tightening torque, min
0.5 Nm
Identification
IEC 61010-1
Electromagnetic HF field
EN 61000-4-3
Discharge in air
15 kV (Test Level 4)
Output
1 kV (Test Level 3 - symmetrical)
ECLASS 9.0
27040705
Width with alternative assembly
123 mm
Installation distance top/bottom (active, passive)
40 mm / 20 mm (POut ≤50 %)
Installation distance top/bottom (active)
50 mm / 50 mm (POut ≥50% )
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Installation height
≤ 4000 m
Switch-over time
0 ms
Input voltage
24 V DC
Reverse polarity protection
yes
Energy storage device connection in series
no
Output voltage range
19 V DC ... 28 V DC (UOUT = UBAT - 0.4 V DC)
IQ-Technology
yes
Conductor cross section AWG max.
12
Standards/regulations
IEC 61010-1 (SELV)
Electrostatic discharge
EN 61000-4-2
Conducted interference
EN 61000-4-6
Frequency
0 Hz
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
UNSPSC 18.0
39121011
Switch-on time
max. 3 s
Selective Fuse Breaking (ISFB)
120 A (15 ms)
Charging time
165 min. (12 Ah)
Life expectancy (electrolytic capacitors)
192072 h
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
30
EMC requirements for noise immunity
EN 61000-6-1
Standard designation
Safety extra-low voltage
Test field strength
300 A/m
Input
1 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
Additional text
DC, 60 s
ECLASS 11.0
27040705
ETIM 7.0
EC000382
Inrush current
≤ 8 A (≤ 4 ms)
Max. capacity
135 Ah
MTBF (IEC 61709, SN 29500)
> 1940000 h (25 °C)
Connection method
Screw connection
Designation
CB scheme
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Criterion A
Normal operating behavior within the specified limits.
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ETIM 6.0
EC000382
Width
40 mm
Depth
125 mm
Installation distance right/left (active, passive)
0 mm / 0 mm (POut ≤50 %)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Degree of pollution
2
Input voltage range
18 V DC ... 30 V DC
Fixed backup threshold
22 V DC
Efficiency
typ. 98 %
Temperature compensation (configurable)
42 mV/K
Conductor cross section flexible min.
0.2 mm²
Tightening torque max
0.6 Nm
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Frequency range
50 Hz ... 60 Hz
I/O/S
asymmetrical
ECLASS 10.0.1
27040705
UNSPSC 13.2
39121004
UNSPSC 20.0
39121011
Installation distance right/left (passive)
0 mm / 0 mm (POut ≥50% )
Installation distance top/bottom (passive)
40 mm / 20 mm (POut ≥50% )
Voltage drop, input/output
0.4 V DC
UPS connection in parallel
no
Battery technology
VRLA, VRLA-WTR, LI-ION
Charging current (configurable)
max. 5 A
Environmental protection directive
RoHS Directive 2011/65/EU
Conductor cross section solid min.
0.2 mm²
Signal
1 kV (Test Level 2 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
Power frequency magnetic field
EN 61000-4-8
UNSPSC 19.0
39121011
UNSPSC 21.0
39121011