2907068 Phoenix Contact UPS (DC)
Part#:2907068
Manufacturer:Phoenix Contact
Category:UPS (DC)
Product Lifecycle:Active
Get a quick Quote!
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A, charging current: 3 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers UPS (DC) that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2907068 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight 0.5 kg
- Height 130 mm
- Width 35 mm
- Depth with alternative assembly 37 mm
- Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Input voltage 24 V DC
- Short-circuit-proof yes
- Energy storage device connection in parallel Yes, 5 (observe line protection)
- End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
- Charging current (configurable) 3 A
- Buffer time 25 min. (7.2 Ah)
- Width with alternative assembly 123 mm
- Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
- Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
- Climatic class 3K3 (EN 60721)
- Reverse polarity protection yes
- Input voltage range 18 V DC ... 30 V DC
- Fixed backup threshold 22 V DC
- Energy storage device connection in series no
- Efficiency typ. 97 %
- Nominal capacity (without additional charger) 1.2 Ah ... 60 Ah
- Deep discharge protection 19.2 V DC
- Life expectancy (electrolytic capacitors) 137895 h
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section AWG max. 12
- Standards/regulations IEC 61010-1 (SELV)
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Comments Criterion A
- I/O/S asymmetrical
- Power frequency magnetic field EN 61000-4-8
- ECLASS 5.1 27242213
- UNSPSC 13.2 39121004
- Depth 125 mm
- Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
- Ambient temperature (start-up type tested) -40 °C
- Inrush current ≤ 7 A (≤ 4 ms)
- UPS connection in parallel no
- No-load proof yes
- Static Boost (IStat.Boost) 12.5 A
- Charging time 120 h
- End-of-charge voltage 32 V DC
- IQ-Technology yes
- Connection method Screw connection
- Single conductor/terminal point, stranded, with ferrule, min. 0.2 mm²
- Stripping length 6.5 mm
- EMC requirements for noise emission EN 61000-6-3
- Designation CB scheme
- Electrostatic discharge EN 61000-4-2
- Frequency range 50 Hz ... 60 Hz
- Signal 1 kV (Test Level 2 - asymmetrical)
- Frequency 0 Hz
- Voltage 10 V (Test Level 3)
- ECLASS 11.0 27040705
- ETIM 7.0 EC000382
- UNSPSC 19.0 39121011
- Height with alternative assembly 130 mm
- Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
- Degree of protection IP20
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Internal input fuse no
- Voltage drop, input/output 0.4 V DC
- UPS connection in series no
- Battery technology VRLA, VRLA-WTR, LI-ION
- Dynamic Boost (IDyn.Boost) 20 A (5 s)
- Temperature compensation (configurable) 42 mV/K
- MTBF (IEC 61709, SN 29500) > 1189000 h (25 °C)
- Conductor cross section solid min. 0.2 mm²
- Single conductor/terminal point, stranded, with ferrule, max. 2.5 mm²
- Conductor cross section flexible max. 2.5 mm²
- Tightening torque max 0.6 Nm
- Identification IEC 61010-1
- Electromagnetic HF field EN 61000-4-3
- Test field strength 300 A/m
- Input 1 kV (Test Level 3 - symmetrical)
- Conducted interference EN 61000-4-6
- ECLASS 10.0.1 27040705
- ETIM 6.0 EC000382
- UNSPSC 21.0 39121011
- Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Degree of pollution 2
- Installation height ≤ 4000 m
- Switch-on time max. 3 s
- Switch-over time 0 ms
- Output voltage range 19 V DC ... 32 V DC
- Selective Fuse Breaking (ISFB) 60 A (15 ms)
- Max. capacity 80 Ah
- Charge characteristic curve IU0U
- Temperature sensor yes
- Conductor cross section solid max. 2.5 mm²
- Tightening torque, min 0.5 Nm
- Standard designation Safety extra-low voltage
- Contact discharge 8 kV (Test Level 4)
- Output 1 kV (Test Level 3 - symmetrical)
- Criterion A Normal operating behavior within the specified limits.
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- UNSPSC 20.0 39121011
- Environmental protection directive RoHS Directive 2011/65/EU
- Conductor cross section AWG min. 30
- EMC requirements for noise immunity EN 61000-6-1
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Discharge in air 15 kV (Test Level 4)
- Fast transients (burst) EN 61000-4-4
- Surge voltage load (surge) EN 61000-4-5
- Additional text DC, 60 s
- REACh SVHC Lead 7439-92-1
- ECLASS 9.0 27040705
- UNSPSC 18.0 39121011
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?