2907056 Phoenix Contact Control Relays

Product Details

• Ambient temperature (operation)
  -40 °C ... 55 °C
• Nominal input voltage UN
  200 V AC
• Type of switch contact
  Single contact
• Height
  27.5 mm
• Input voltage range in reference to UN
  see diagram
• Contact type
  4 changeover contacts
• Minimum switching voltage
  5 V (At 24 mA)
• Switching capacity min.
  0.12 W
• Test voltage
  2.5 kVrms (50 Hz, 1 min., winding/contact)
• Depth
  35.6 mm
• Degree of protection
  RT I
• Typical response time
  5 ms ... 15 ms (depending on phase relation)
• Maximum switching voltage
  250 V AC/DC
• Switching capacity
  2 A (at 24 V, DC13)
• Standards/regulations
  IEC 60664
• Overvoltage category
  II
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27371600
• ECLASS 9.0
  27371601
• ETIM 7.0
  EC001437
UNSPSC 13.2
39122334
Width
21.2 mm
Typical input current at UN
7.1 mA
Typical release time range
5 ms ... 20 ms (depending on phase relation)
Contact material
AgNi
Maximum inrush current
16 A (20 ms, N/O contacts)
Mechanical service life
1x 107 cycles, approximately
Rated insulation voltage
250 V AC
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Mains frequency
50/60 Hz
Power dissipation for nominal condition
1.42 W
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
Operating mode
100% operating factor
Connection method
Plug connection
Insulation
Basic insulation
ECLASS 11.0
27371601
ETIM 4.0
EC001437
ECLASS 7.0
27371601
UNSPSC 6.01
30211916
UNSPSC 21.0
39122334
Mounting position
any
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 4.0
27371100
ECLASS 5.1
27371600
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
Limiting continuous current
6 A
UNSPSC 12.01
39121515
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 4.1
27371100
ETIM 3.0
EC001437
UNSPSC 7.0901
39121515
UNSPSC 11
39121515
Min. switching current
5 mA (at 24 V)
Rated surge voltage
2.5 kV
Designation
Corrosive gas test
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 20.0
39122334