2906994 Phoenix Contact UPS (DC)
Part#:2906994
Manufacturer:Phoenix Contact
Category:UPS (DC)
Product Lifecycle:Active
Get a quick Quote!
QUINT UPS with IQ Technology, RJ45 communication interfaces (EtherNet/IP™), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers UPS (DC) that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2906994 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight 0.5 kg
- Depth 125 mm
- UPS connection in parallel no
- Output voltage range 19 V DC ... 32 V DC (UOUT = UBAT - 0.3 V DC)
- Height with alternative assembly 130 mm
- Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
- Ambient temperature (start-up type tested) -40 °C
- Climatic class 3K3 (EN 60721)
- Input voltage range 18 V DC ... 30 V DC
- Internal input fuse no
- Switch-on time max. 3 s
- End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
- Nominal capacity (without additional charger) 0.8 Ah ... 30 Ah
- Life expectancy (electrolytic capacitors) 224011 h
- Conductor cross section solid min. 0.2 mm²
- Single conductor/terminal point, stranded, with ferrule, min. 0.2 mm²
- Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Degree of pollution 2
- Fixed backup threshold 22 V DC
- Switch-over time 0 ms
- Energy storage device connection in series no
- Charging time 2.5 h (3.4 Ah)
- Width 35 mm
- Depth with alternative assembly 37 mm
- Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Input voltage 24 V DC
- Identification IEC 61010-1
- Charge characteristic curve IU0U
- Temperature sensor yes
- Connection method Screw connection
- Conductor cross section flexible min. 0.2 mm²
- Single conductor/terminal point, stranded, with ferrule, max. 2.5 mm²
- Standard designation Safety extra-low voltage
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Discharge in air 15 kV (Test Level 4)
- Fast transients (burst) EN 61000-4-4
- Signal 1 kV (Test Level 2 - asymmetrical)
- Power frequency magnetic field EN 61000-4-8
- Frequency 0 Hz
- ECLASS 5.1 27242213
- UNSPSC 21.0 39121011
- Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
- Degree of protection IP20
- Voltage drop, input/output 0.3 V DC
- UPS connection in series no
- Static Boost (IStat.Boost) 6.25 A
- End-of-charge voltage 32 V DC
- IQ-Technology yes
- Environmental protection directive RoHS Directive 2011/65/EU
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section AWG max. 12
- Stripping length 6.5 mm
- Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
- Installation height ≤ 4000 m
- Energy storage device connection in parallel Yes, 5 (observe line protection)
- Dynamic Boost (IDyn.Boost) 10 A (5 s)
- Battery technology VRLA, VRLA-WTR, LI-ION
- Max. capacity 40 Ah
- MTBF (IEC 61709, SN 29500) > 1189000 h (25 °C)
- Tightening torque max 0.6 Nm
- EMC requirements for noise immunity EN 61000-6-1
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Electromagnetic HF field EN 61000-4-3
- Voltage 10 V (Test Level 3)
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- Height 130 mm
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Reverse polarity protection yes
- No-load proof yes
- Charging current (configurable) max. 1.5 A
- Buffer time 25 min. (3.4 Ah)
- Tightening torque, min 0.5 Nm
- Designation CB scheme
- Contact discharge 8 kV (Test Level 4)
- Test field strength 300 A/m
- Conducted interference EN 61000-4-6
- Additional text DC, 60 s
- REACh SVHC Lead 7439-92-1
- ECLASS 9.0 27040705
- UNSPSC 13.2 39121004
- UNSPSC 20.0 39121011
- Width with alternative assembly 123 mm
- Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
- Electric strength, max. 35 V DC (Protected against polarity reversal)
- Inrush current ≤ 7 A (≤ 4 ms)
- Short-circuit-proof yes
- Efficiency typ. 97 %
- Selective Fuse Breaking (ISFB) 30 A (15 ms)
- Temperature compensation (configurable) 42 mV/K
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section AWG min. 30
- EMC requirements for noise emission EN 61000-6-3
- Standards/regulations IEC 61010-1 (SELV)
- Electrostatic discharge EN 61000-4-2
- Output 1 kV (Test Level 3 - symmetrical)
- Surge voltage load (surge) EN 61000-4-5
- I/O/S asymmetrical
- ECLASS 10.0.1 27040705
- ETIM 7.0 EC000382
- UNSPSC 19.0 39121011
- Frequency range 50 Hz ... 60 Hz
- Comments Criterion A
- Input 1 kV (Test Level 3 - symmetrical)
- Criterion A Normal operating behavior within the specified limits.
- ECLASS 11.0 27040705
- ETIM 6.0 EC000382
- UNSPSC 18.0 39121011
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?