2906993 Phoenix Contact UPS (DC)
Part#:2906993
Manufacturer:Phoenix Contact
Category:UPS (DC)
Product Lifecycle:Active
Get a quick Quote!
QUINT UPS with IQ Technology, RJ45 communication interfaces (PROFINET), for DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A, charging current: 1.5 A
About the manufacturer: Phoenix Contact is one of the manufacturers that offers UPS (DC) that you can order at Power Resources International site. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2906993 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Weight 0.5 kg
- Width with alternative assembly 123 mm
- Installation distance right/left (active) 5 mm / 5 mm (POut ≥50% )
- Degree of pollution 2
- Inrush current ≤ 7 A (≤ 4 ms)
- Voltage drop, input/output 0.3 V DC
- UPS connection in series no
- Energy storage device connection in series no
- Battery technology VRLA, VRLA-WTR, LI-ION
- Depth 125 mm
- Installation distance right/left (passive) 0 mm / 0 mm (POut ≥50% )
- Installation distance top/bottom (active, passive) 40 mm / 20 mm (POut ≤50 %)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Input voltage 24 V DC
- Internal input fuse no
- Switch-on time max. 3 s
- UPS connection in parallel no
- Efficiency typ. 97 %
- End-of-charge voltage (temperature-compensated) 25 V DC ... 32 V DC
- Temperature compensation (configurable) 42 mV/K
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section flexible max. 2.5 mm²
- Single conductor/terminal point, stranded, with ferrule, max. 2.5 mm²
- Standards/regulations IEC 61010-1 (SELV)
- Designation CB scheme
- Discharge in air 15 kV (Test Level 4)
- Signal 1 kV (Test Level 2 - asymmetrical)
- Surge voltage load (surge) EN 61000-4-5
- Height 130 mm
- Height with alternative assembly 130 mm
- Installation distance top/bottom (passive) 40 mm / 20 mm (POut ≥50% )
- Degree of protection IP20
- Climatic class 3K3 (EN 60721)
- Installation height ≤ 4000 m
- Input voltage range 18 V DC ... 30 V DC
- Fixed backup threshold 22 V DC
- Short-circuit-proof yes
- Energy storage device connection in parallel Yes, 5 (observe line protection)
- Static Boost (IStat.Boost) 6.25 A
- Selective Fuse Breaking (ISFB) 30 A (15 ms)
- Max. capacity 40 Ah
- Charge characteristic curve IU0U
- Life expectancy (electrolytic capacitors) 224011 h
- Conductor cross section flexible min. 0.2 mm²
- Conductor cross section AWG min. 30
- EMC requirements for noise immunity EN 61000-6-1
- Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
- Electrostatic discharge EN 61000-4-2
- Width 35 mm
- Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≤50 %)
- Inflammability class in acc. with UL 94 (housing / terminal blocks) V0
- Ambient temperature (start-up type tested) -40 °C
- Electric strength, max. 35 V DC (Protected against polarity reversal)
- Switch-over time 0 ms
- Output voltage range 19 V DC ... 32 V DC (UOUT = UBAT - 0.3 V DC)
- Nominal capacity (without additional charger) 0.8 Ah ... 30 Ah
- Buffer time 25 min. (3.4 Ah)
- MTBF (IEC 61709, SN 29500) > 1189000 h (25 °C)
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section AWG max. 12
- Stripping length 6.5 mm
- Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
- Test field strength 300 A/m
- Comments Criterion A
- Voltage 10 V (Test Level 3)
- Criterion A Normal operating behavior within the specified limits.
- ECLASS 9.0 27040705
- ECLASS 5.1 27242213
- Depth with alternative assembly 37 mm
- Installation distance top/bottom (active) 50 mm / 50 mm (POut ≥50% )
- Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
- Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
- Reverse polarity protection yes
- No-load proof yes
- Dynamic Boost (IDyn.Boost) 10 A (5 s)
- End-of-charge voltage 32 V DC
- Charging time 2.5 h (3.4 Ah)
- Temperature sensor yes
- Connection method Screw connection
- Tightening torque, min 0.5 Nm
- Tightening torque max 0.6 Nm
- Standard designation Safety extra-low voltage
- Contact discharge 8 kV (Test Level 4)
- Fast transients (burst) EN 61000-4-4
- Conducted interference EN 61000-4-6
- Criterion B Temporary impairment to operational behavior that is corrected by the device itself.
- ECLASS 11.0 27040705
- UNSPSC 20.0 39121011
- Charging current (configurable) max. 1.5 A
- IQ-Technology yes
- Environmental protection directive RoHS Directive 2011/65/EU
- Single conductor/terminal point, stranded, with ferrule, min. 0.2 mm²
- EMC requirements for noise emission EN 61000-6-3
- Identification IEC 61010-1
- Frequency range 50 Hz ... 60 Hz
- Input 1 kV (Test Level 3 - symmetrical)
- I/O/S asymmetrical
- Additional text DC, 60 s
- ECLASS 10.0.1 27040705
- UNSPSC 19.0 39121011
- Electromagnetic HF field EN 61000-4-3
- Output 1 kV (Test Level 3 - symmetrical)
- Frequency 0 Hz
- REACh SVHC Lead 7439-92-1
- ETIM 6.0 EC000382
- UNSPSC 18.0 39121011
- Power frequency magnetic field EN 61000-4-8
- ETIM 7.0 EC000382
- UNSPSC 13.2 39121004
- UNSPSC 21.0 39121011
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Fast Shipping & Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Need more details?
Feel free to chat with us
What can I help you find today?