2906876 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Height
  109.81 mm
• Maximum altitude
  ≤ 2000 m
• Linear resistance measuring range
  0 Ω ... 4000 Ω
• Max. switching current
  100 mA (30 V)
• Maximum switching voltage
  30 V DC
• Screw thread
  M3
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• No. of channels
  1
• Test voltage, input/output/supply
  3 kV (50 Hz, 1 min.)
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• UL, USA/Canada
  UL 508 Listed
• Certificate
  DNV GL TAA000021E
• Temperature
  B
• ECLASS 4.1
  27210100
• ETIM 6.0
  EC002654
• UNSPSC 7.0901
  39121008
• UNSPSC 13.2
  39121008
• Depth
  119.2 mm
• Width
  6.2 mm
• Number of inputs
  1
Sensor input current
approx. 200 µA
Linear mV signal range
-500 mV ... 500 mV
Output name
Switching output
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Connection method
Screw connection
Torque
0.5 Nm ... 0.6 Nm
Status display
Yellow LED (switching output)
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
DNV GL-Temperature
B
Designation
Shipbuilding approval
Ambient temperature (operation)
-40 °C ... 70 °C
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Connection technology
2-, 3-, 4-conductor
Sensor types (RTD) that can be used
Pt, Ni, Cu sensors
Number of outputs
2
Nominal supply voltage
24 V DC
Switching point accuracy
< 0.1 %
Rated insulation voltage
300 V
Noise emission
EN 61000-6-4
Mounting position
any
ATEX
 II 3 G Ex nA IIC T4 Gc X
DNV GL-Vibration
A
Identification
UL 508 Listed
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Available input sources
Thermocouples
Sensor types that can be used (TC)
B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
Power consumption
350 mW
Stripping length
10 mm
Conductor cross section AWG
24 ... 12 (flexible)
Overvoltage category
II
Degree of pollution
2
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
DNV GL-Humidity
B
DNV GL-EMC
A
EMC
A
ECLASS 10.0.1
27210122
ECLASS 7.0
27210122
UNSPSC 6.01
30211506
UNSPSC 18.0
39121008
Degree of protection
IP20 (not assessed by UL)
Max. permissible overall conductor resistance
≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
Contact type
2 N/O contacts
Typical current consumption
20 mA (12 V DC)
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Maximum temperature coefficient
0.01 %/K
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Electromagnetic compatibility
Conformance with EMC directive
Color
gray
Conformance
CE-compliant
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
Humidity
B
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210100
ETIM 4.0
EC002654
ETIM 7.0
EC002654
UNSPSC 21.0
39121008
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 11.0
27210122
ECLASS 5.0
27210100
ECLASS 9.0
27210122
UNSPSC 12.01
39121008
UNSPSC 19.0
39121008
ECLASS 5.1
27210100
ECLASS 6.0
27210100
UNSPSC 11
39121008
UNSPSC 20.0
39121008