2906223 Phoenix Contact Control Relays

Product Details

• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Input voltage range in reference to UN
  see diagram
• Coil voltage
  12 V DC
• Type of switch contact
  Single contact
• Maximum inrush current
  25 A (20 ms, N/O contacts)
• Assembly instructions
  In rows with zero spacing
• Connection method
  Push-in connection
• Rated surge voltage
  6 kV
• Insulation
  Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Type of note
  Notes on operation
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Typical response time
  8 ms
• Protective circuit
  Damping diode
• Limiting continuous current
  8 A (see diagram)
• Minimum switching voltage
  5 V (at 10 mA)
• Operating mode
  100% operating factor
• Service life, electrical
  see diagram
• Conductor cross section flexible
  0.14 mm² ... 1.5 mm²
• Designation
  Corrosive gas test
ECLASS 11.0
27371601
ECLASS 6.0
27371600
ETIM 3.0
EC001437
ETIM 7.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
93 mm
Degree of protection
IP20 (Relay base)
Operating voltage display
Yellow LED
Maximum switching voltage
250 V AC/DC
Stripping length
8 mm
Standards/regulations
DIN EN 50178
Overvoltage category
III
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 2.0
EC001437
ETIM 6.0
EC001437
UNSPSC 21.0
39122334
Width
16 mm
Nominal input voltage UN
12 V DC
Typical release time
10 ms
Power dissipation for nominal condition
0.4 W
Contact material
AgNi
Min. switching current
10 mA (At 5 V)
Switching capacity
2 A (at 24 V, DC13)
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 7.0
27371601
ETIM 4.0
EC001437
UNSPSC 12.01
39121516
UNSPSC 20.0
39122334
Note
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Depth
75 mm
Typical input current at UN
33 mA
Contact type
2 changeover contacts
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 3x 107 cycles
Connection name
Contact side
Conductor cross section AWG
26 ... 16 (solid)
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
UNSPSC 7.0901
39121516
UNSPSC 18.0
39122334
UNSPSC 19.0
39122334
UNSPSC 6.01
30211917
UNSPSC 13.2
39122334
UNSPSC 11
39121516