2905661 Phoenix Contact Control Relays

Product Details

• Insulation
  safe isolation
• ECLASS 11.0
  27371601
• ECLASS 5.1
  27371600
• ECLASS 7.0
  27371601
• ETIM 4.0
  EC001437
• UNSPSC 13.2
  39122334
• Width
  16 mm
• Depth
  75 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Nominal input voltage UN
  230 V AC (50/60 Hz)
• Mains frequency
  50/60 Hz
• Typical response time
  4 ms ... 12 ms
• Coil voltage
  230 V AC
• Operating voltage display
  Yellow LED
• Type of switch contact
  Single contact
• Maximum switching voltage
  250 V AC/DC
• Min. switching current
  10 mA (at 12 V)
• Interrupting rating (ohmic load) max.
  240 W (at 24 V DC)
• Switching capacity
  2 A (at 24 V, DC13)
• Operating mode
  100% operating factor
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Connection name
Contact side
Stripping length
8 mm
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Torque
0.5 Nm ... 0.6 Nm
Rated insulation voltage
250 V AC
Pollution degree
2
Designation
Corrosive gas test
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27371600
ETIM 2.0
EC001437
ETIM 6.0
EC001437
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Height
89 mm
Ambient temperature (operation)
-40 °C ... 50 °C
Degree of protection
IP20 (Relay base)
Input voltage range in reference to UN
see diagram
Typical input current at UN
4.5 mA
Typical release time range
4 ms ... 20 ms
Protective circuit
Varistor
Contact type
1 changeover contact
Contact material
AgNi
Minimum switching voltage
12 V (at 10 mA)
Maximum inrush current
32 A (20 ms, N/O contacts)
Limiting continuous current
see diagram
Switching capacity min.
120 mW
Test voltage
4 kVrms (50 Hz, 1 min., winding/contact)
Mechanical service life
approx. 5x 106 cycles
Service life, electrical
see diagram
Assembly instructions
In rows with zero spacing
Connection method
Screw connection
Conductor cross section solid
0.5 mm² ... 4 mm²
Conductor cross section flexible
0.5 mm² ... 4 mm²
Conductor cross section AWG
20 ... 10 (solid)
Standards/regulations
DIN EN 50178
Rated surge voltage
6 kV
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371601
ECLASS 5.0
27371600
ECLASS 9.0
27371601
ETIM 3.0
EC001437
ETIM 7.0
EC001437
UNSPSC 20.0
39122334
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
UNSPSC 19.0
39122334