2905660 Phoenix Contact Control Relays

Product Details

• Degree of protection
  IP20 (Relay base)
• Typical input current at UN
  18 mA
• Type of switch contact
  Single contact
• Min. switching current
  10 mA (at 12 V)
• Limiting continuous current
  see diagram
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Stripping length
  8 mm
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Nominal input voltage UN
  24 V DC
• Width
  16 mm
• Height
  89 mm
• Input voltage range in reference to UN
  see diagram
• Protective circuit
  Damping diode
• Coil voltage
  24 V DC
• Power dissipation for nominal condition
  0.43 W
• Switching capacity min.
  120 mW
• Interrupting rating (ohmic load) max.
  192 W (at 24 V DC)
• Depth
  75 mm
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Typical release time
  10 ms
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
12 V (at 10 mA)
Contact type
2 changeover contacts
Switching capacity
1 A (at 24 V, DC13)
Service life, electrical
see diagram
Connection method
Screw connection
Operating voltage display
Yellow LED
Mounting position
any
Connection name
Contact side
Conductor cross-section solid (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Standards/regulations
DIN EN 50178
Insulation
safe isolation
Rated surge voltage
6 kV
ECLASS 10.0.1
27371601
ETIM 2.0
EC001437
ECLASS 9.0
27371601
UNSPSC 20.0
39122334
Ambient temperature (operation)
-40 °C ... 60 °C
Typical response time
9 ms
Contact material
AgNi
Assembly instructions
In rows with zero spacing
Torque
0.5 Nm ... 0.6 Nm
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 5.1
27371600
ETIM 6.0
EC001437
UNSPSC 21.0
39122334
Maximum inrush current
12 A (20 ms, N/O contacts)
Operating mode
100% operating factor
Mechanical service life
approx. 5x 106 cycles
Conductor cross section flexible
0.5 mm² ... 4 mm²
Pollution degree
2
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27371600
ETIM 4.0
EC001437
UNSPSC 13.2
39122334
ETIM 7.0
EC001437
Flammability rating according to UL 94
V2 (Housing)
Conductor cross section AWG
20 ... 10 (solid)
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² ... 2.5 mm²
Designation
Corrosive gas test
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 3.0
EC001437
UNSPSC 19.0
39122334
Conductor cross section solid
0.5 mm² ... 4 mm²
Rated insulation voltage
250 V AC
Overvoltage category
III
ECLASS 6.0
27371600
UNSPSC 18.0
39122334