2905633 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Available input sources
  Thermocouples
• Linear mV signal range
  -500 mV ... 500 mV
• Nominal supply voltage
  24 V DC
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 2
• Max. permissible overall conductor resistance
  ≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
• Electromagnetic compatibility
  Conformance with EMC directive
• Mounting position
  any
• Identification
  UL 508 Listed
• Vibration
  A
• China RoHS
  Environmentally Friendly Use Period = 50 years
• Degree of protection
  IP20 (not assessed by UL)
• Sensor input current
  approx. 200 µA
• Limiting continuous current
  6 A AC
• Internal hysteresis
  can be set freely via software
• Width
  6.2 mm
• Sensor types (RTD) that can be used
  Pt, Ni, Cu sensors
• Power consumption
  570 mW
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 2
Depth
119.2 mm
Connection technology
2-, 3-, 4-conductor
Output name
Relay output
Mechanical service life
2x 107 cycles
Max. switching current
6 A AC (250 V AC)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Switching point accuracy
< 0.1 %
Designation
Shipbuilding approval
ECLASS 4.1
27210100
ECLASS 7.0
27210122
Contact type
1 N/O contact
No. of channels
1
Maximum temperature coefficient
0.01 %/K
Degree of pollution
2
Housing material
PBT
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Humidity
B
ECLASS 4.0
27210100
ECLASS 5.1
27210100
ECLASS 9.0
27210122
ETIM 7.0
EC002654
Height
109.81 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Sensor types that can be used (TC)
B, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
Min. switching current
100 mA (12 V DC)
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Conductor cross section solid
0.2 mm² ... 2.5 mm² (with ferrule)
Status display
Yellow LED (switching output)
Overvoltage category
II
Noise emission
EN 61000-6-4
Color
gray
REACh SVHC
Lead 7439-92-1
ECLASS 10.0.1
27210122
ETIM 4.0
EC002654
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Linear resistance measuring range
0 Ω ... 4000 Ω
Maximum switching voltage
250 V AC
Typical current consumption
44 mA (12 V DC)
Conductor cross section AWG
24 ... 12 (flexible)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Rated insulation voltage
300 V
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
EMC
A
ECLASS 11.0
27210122
ECLASS 5.0
27210100
Ambient temperature (operation)
-40 °C ... 70 °C
Contact material
AgSnO2, hard gold-plated
Setting range of the response delay
0 s ... 10 s (can be set freely via software)
Connection method
Push-in connection
Stripping length
10 mm
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Certificate
DNV GL TAA000021E
Temperature
B
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 6.0
27210100
ETIM 6.0
EC002654