2905292 Phoenix Contact Control Relays

Product Details

• Width
  16 mm
• Height
  93 mm
• Degree of protection
  IP20 (Relay base)
• Mains frequency
  50/60 Hz
• Maximum switching voltage
  250 V AC/DC
• Maximum inrush current
  16 A (20 ms, N/O contacts)
• Switching capacity min.
  120 mW
• Operating mode
  100% operating factor
• Assembly instructions
  In rows with zero spacing
• Stripping length
  8 mm
• Rated insulation voltage
  250 V AC
• Depth
  75 mm
• Ambient temperature (operation)
  -40 °C ... 45 °C
• Typical release time range
  3 ms ... 20 ms
• Protective circuit
  Varistor
• Power dissipation for nominal condition
  0.81 W
• Contact material
  AgNi
• Interrupting rating (ohmic load) max.
  192 W (at 24 V DC)
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Mechanical service life
  approx. 5x 106 cycles
Connection name
Contact side
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Standards/regulations
DIN EN 50178
China RoHS
Environmentally Friendly Use Period = 50 years
Switching capacity
1 A (at 24 V, DC13)
Service life, electrical
see diagram
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Insulation
safe isolation
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 11.0
27371601
ECLASS 5.1
27371600
ETIM 2.0
EC001437
ETIM 7.0
EC001437
UNSPSC 21.0
39122334
Overvoltage category
III
ECLASS 9.0
27371601
ETIM 3.0
EC001437
ETIM 6.0
EC001437
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage UN
230 V AC (50/60 Hz)
Typical input current at UN
3.5 mA
Coil voltage
230 V AC
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download area
Input voltage range in reference to UN
see diagram
Typical response time
4 ms ... 10 ms
Type of switch contact
Single contact
Min. switching current
10 mA (at 12 V)
Limiting continuous current
see diagram
Flammability rating according to UL 94
V2 (Housing)
Rated surge voltage
6 kV
Pollution degree
2
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 7.0
27371601
UNSPSC 13.2
39122334
UNSPSC 20.0
39122334
Operating voltage display
Yellow LED
Contact type
2 changeover contacts
Minimum switching voltage
12 V (at 10 mA)
Mounting position
any
Conductor cross section AWG
26 ... 16 (solid)
Designation
Corrosive gas test
ECLASS 5.0
27371600
ECLASS 6.0
27371600
ETIM 4.0
EC001437
UNSPSC 18.0
39122334