2905289 Phoenix Contact Control Relays

Product Details

• Height
  93 mm
• Degree of protection
  IP20 (Relay base)
• Typical response time
  9 ms
• Protective circuit
  Damping diode
• Type of switch contact
  Single contact
• Maximum inrush current
  24 A (20 ms, N/O contacts)
• Width
  16 mm
• Ambient temperature (operation)
  -40 °C ... 60 °C
• Input voltage range in reference to UN
  see diagram
• Typical release time
  10 ms
• Operating voltage display
  Yellow LED
• Minimum switching voltage
  12 V (at 10 mA)
• Maximum switching voltage
  250 V AC/DC
• Test voltage
  4 kVrms (50 Hz, 1 min., winding/contact)
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  75 mm
• Nominal input voltage UN
  24 V DC
• Coil voltage
  24 V DC
• Power dissipation for nominal condition
  0.43 W
• Min. switching current
  10 mA (at 12 V)
Interrupting rating (ohmic load) max.
264 W (at 24 V DC)
Mechanical service life
approx. 5x 106 cycles
Service life, electrical
see diagram
Assembly instructions
In rows with zero spacing
Conductor cross section solid
0.14 mm² ... 1.5 mm²
Rated surge voltage
6 kV
Rated insulation voltage
250 V AC
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 11.0
27371601
ECLASS 7.0
27371601
ETIM 2.0
EC001437
ECLASS 9.0
27371601
ETIM 7.0
EC001437
UNSPSC 19.0
39122334
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Typical input current at UN
18 mA
Contact type
1 changeover contact
Contact material
AgNi
Limiting continuous current
see diagram
Switching capacity min.
120 mW
Flammability rating according to UL 94
V2 (Housing)
Mounting position
any
Connection name
Contact side
Stripping length
8 mm
Standards/regulations
DIN EN 50178
Pollution degree
2
Insulation
safe isolation
ECLASS 10.0.1
27371601
ECLASS 4.1
27371100
ECLASS 5.1
27371600
ETIM 3.0
EC001437
UNSPSC 13.2
39122334
UNSPSC 18.0
39122334
UNSPSC 21.0
39122334
Switching capacity
2 A (at 24 V, DC13)
Operating mode
100% operating factor
Connection method
Push-in connection
Conductor cross section flexible
0.14 mm² ... 1.5 mm²
Conductor cross section AWG
26 ... 16 (solid)
Overvoltage category
III
Identification
ISA-S71.04. G3 Harsh Group
Designation
Corrosive gas test
ECLASS 5.0
27371600
ECLASS 6.0
27371600
ETIM 4.0
EC001437
ETIM 6.0
EC001437
UNSPSC 20.0
39122334