2905249 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Load/output load voltage output
  ≥ 10 kΩ
• Conductor cross section flexible
  0.14 mm² ... 2.5 mm²
• Typical cold point errors
  2 K (2 K + (0,2 K * ΔT))
• Degree of pollution
  2
• Assembly instructions
  The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
• Typical deviation from the measuring range final value
  0.05 %
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Noise immunity
  EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
• Max. output voltage
  approx. 12.3 V
• Height
  109.81 mm
• Configurable/programmable
  Yes
• Number of outputs
  1
• Max. output current
  24.6 mA
• Ripple
  < 10 mVrms
• Conductor cross section solid
  0.2 mm² ... 2.5 mm² (with ferrule)
• Maximum temperature coefficient
  ≤ 0.01 %/K
• Overvoltage category
  II
Housing material
PBT
Width
6.2 mm
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Sensor types that can be used (TC)
B, C, E, J, K, N, R, S, T, L, U, A-1, A-2, A-3, M, L
Load/output load current output
≤ 600 Ω (at 20 mA)
Stripping length
10 mm
Conductor cross section AWG
24 ... 12 (flexible)
Rated insulation voltage
300 V (effective)
Mounting position
any
Depth
119.2 mm
Degree of protection
IP20 (not assessed by UL)
Voltage output signal
0 V ... 5 V (via DIP switch)
Typical current consumption
32.7 mA (24 V DC)
Power consumption
≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Protective circuit
Transient protection
Conformance
CE-compliant
Electromagnetic compatibility
Conformance with EMC directive
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27200200
ECLASS 5.1
27200200
ETIM 6.0
EC002919
UNSPSC 7.0901
39121008
UNSPSC 13.2
41112105
UNSPSC 21.0
41112105
ETIM 2.0
EC001446
ETIM 4.0
EC001446
UL, USA/Canada
UL 508 Listed
ECLASS 11.0
27210129
ECLASS 4.1
27200200
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 19.0
41112105
Standards/regulations
EN 61000-4-6
ECLASS 10.0.1
27210129
ECLASS 7.0
27200206
ECLASS 9.0
27210129
UNSPSC 6.01
30211506
UNSPSC 20.0
41112105
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Identification
C, EMC2
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27200200
ETIM 3.0
EC001446
ETIM 7.0
EC002919
UNSPSC 18.0
41112105
ATEX
 II 3 G Ex nA IIC T4 Gc X
Certificate
DNV GL 14445-15HH
Temperature measuring range
-250 °C ... 2500 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 1350°C via DIP switches)
Short-circuit current
< 31.5 mA
Designation
Shipbuilding approval
Current output signal
0 mA ... 20 mA (via DIP switch)
Transmission error thermocouples
0.1% * 600 K / set measuring range; 0.1% > 600 K (C, E, J, K, N, T, L, U, M Gost, L Gost)
Noise emission
EN 61000-6-4
Connection method
Push-in connection
ECLASS 5.0
27200200