2905026 Phoenix Contact Electrical Measuring & Monitoring Instruments

Product Details

• ECLASS 5.1
  27210100
• Height
  109.81 mm
• Configurable/programmable
  Yes
• Load/output load voltage output
  ≥ 10 kΩ
• Maximum temperature coefficient
  0.01 %/K
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Supply voltage range
  9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
• Stripping length
  10 mm
• UNSPSC 20.0
  39121008
• Maximum transmission error
  0.05 % (of final value)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• max. input voltage
  12 V
• Nominal supply voltage
  24 V DC
• Short-circuit current
  ≤ 25 mA
• Power consumption
  1.5 W (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• No. of channels
  2
• Color
  gray
• UNSPSC 19.0
  39121008
• Ambient temperature (operation)
  -40 °C ... 70 °C
• Standards/regulations
  EN 61000-4-6
Conformance
CE-compliant
DNV GL-Vibration
A
Certificate
DNV GL TAA000021E
ETIM 6.0
EC002653
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Housing material
PBT
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
DNV GL-Enclosure
Required protection according to the Rules shall be provided upon installation on board
REACh SVHC
Lead 7439-92-1
Permissible humidity (operation)
5 % ... 95 % (non-condensing)
Temperature
B
Voltage output signal
0 V ... 10 V (via DIP switch)
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
DNV GL-EMC
A
Enclosure
Required protection according to the Rules shall be provided upon installation on board
Humidity
B
ECLASS 11.0
27210120
Input resistance of voltage input
> 120 kΩ
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
Voltage input signal
0 V ... 10 V (via DIP switch)
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Current input signal
0 mA ... 20 mA (via DIP switch)
Max. output current
24.6 mA
Electromagnetic compatibility
Conformance with EMC directive
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Noise emission
EN 61000-6-4
Max. output voltage
approx. 12.3 V
Overvoltage category
II
Conductor cross section AWG
24 ... 12 (flexible)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Typical deviation from the measuring range final value
2.8 %
Max. input current
24 mA
Load/output load current output
≤ 600 Ω (per channel)
Screw thread
M3
Designation
Shipbuilding approval
Vibration
A
Maximum altitude
≤ 2000 m
Ripple
< 20 mVPP (at 600 Ω)
Torque
0.5 Nm ... 0.6 Nm
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
ATEX
 II 3 G Ex nA IIC T4 Gc X
Identification
UL 508 Listed
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27210100
ECLASS 7.0
27210120
UNSPSC 13.2
39121008
UNSPSC 12.01
39121008
Width
6.2 mm
Number of inputs
1
Number of outputs
2
Connection method
Screw connection
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
UL, USA/Canada
UL 508 Listed
ECLASS 4.0
27210100
ETIM 4.0
EC002653
ETIM 7.0
EC002653
Degree of protection
IP20 (not assessed by UL)
Current output signal
0 mA ... 20 mA (via DIP switch)
Typical current consumption
55 mA (24 V DC)
Rated insulation voltage
300 V
ECLASS 5.0
27210100
UNSPSC 18.0
39121008
Degree of pollution
2
Mounting position
any
DNV GL-Temperature
B
DNV GL-Humidity
B
EMC
A
ECLASS 10.0.1
27210120
ECLASS 9.0
27210120
UNSPSC 11
39121008
UNSPSC 21.0
39121008
ECLASS 4.1
27210100
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008