2905011 Phoenix Contact DC/DC Converters

Product Details

• Width
  48 mm
• UNSPSC 18.0
  39121041
• Height
  130 mm
• Installation distance right/left
  0 mm / 0 mm (≤ 70 °C)
• Installation distance top/bottom (active)
  50 mm / 50 mm (≤ 70 °C)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  5.6 A (60 V DC)
• Nominal output voltage
  24 V DC ±1 %
• POWER BOOST (IBoost)
  12.5 A (-40°C ... 40°C permanent, UOUT = 24 V DC )
• Connection in parallel
  Yes, for redundancy and increased capacity
• Control deviation
  < 1 % (change in load, static 10 % ... 90 %)
• Maximum power dissipation in no-load condition
  4 W (UIN 60 V DC)
• Power loss nominal load max.
  24 W (UIN 60 V DC)
• Protection class
  I
• Assembly instructions
  alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
• Connection method
  Screw connection
• Conductor cross section AWG min.
  24
• EMC requirements for noise immunity
  EN 61000-6-1
• EMC requirements for noise emission
  EN 61000-6-3
• Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
  EN 50178/VDE 0160 (PELV)
Rail applications
EN 50121-4
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Test field strength
10 V/m (Test Level 3)
Comments
Criterion A
I/O/S
asymmetrical
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27210901
ECLASS 5.0
27210900
ECLASS 9.0
27210901
Depth
125 mm
Depth with alternative assembly
51 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
100 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Inrush current
< 9 A (typical)
Protective circuit/component
Varistor
Selective Fuse Breaking (ISFB)
60 A (12 ms)
Connection in series
yes
Feedback voltage resistance
35 V DC
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Efficiency
> 91 % (UIN 60 V DC / UOUT 24 V DC)
MTBF (IEC 61709, SN 29500)
> 1349000 h (25 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
12
Stripping length
7 mm
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Electrostatic discharge
EN 61000-4-2
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Signal
1 kV (Test Level 2 - asymmetrical)
Surge voltage load (surge)
EN 61000-4-5
Conducted interference
EN 61000-4-6
ECLASS 10.0.1
27210901
ECLASS 4.0
27210900
ECLASS 5.1
27210900
ETIM 6.0
EC002046
UNSPSC 19.0
39121041
Height with alternative assembly
130 mm
Installation distance right/left (active)
15 mm / 15 mm (≤ 70 °C)
Ambient temperature (start-up type tested)
-40 °C
Nominal input voltage range
60 V DC ... 72 V DC
Input fuse
10 A 150 V DC (internal (device protection))
Type of protection
Transient surge protection
Nominal output current (IN)
10 A (-40 °C ... 60 °C)
Protection against overvoltage at the output (OVP)
< 35 V DC
Max. capacitive load
unlimited
Active current limitation
18 A
Net weight
1 kg
Insulation voltage input/output
1.5 kV (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
UL approvals
UL/C-UL listed UL 508
Discharge in air
15 kV (Test Level 4)
Frequency range
9 kHz ... 80 MHz
Input
2 kV (Test Level 4 - symmetrical)
Output
1 kV (Test Level 3 - symmetrical)
Voltage
10 V (Test Level 3)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 4.1
27210900
ECLASS 6.0
27210900
ECLASS 7.0
27210901
ETIM 7.0
EC002046
Width with alternative assembly
122 mm
Installation distance top/bottom
50 mm / 50 mm (≤ 70 °C)
Degree of protection
IP20
Degree of pollution
2
Input voltage range
42 V DC ... 96 V DC
Mains buffering time
typ. 10 ms (60 V DC)
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Derating
60 °C ... 70 °C (2.5%/K)
Residual ripple
< 20 mVPP
UNSPSC 13.2
39121041
UNSPSC 20.0
39121041
UNSPSC 21.0
39121041