2905010 Phoenix Contact DC/DC Converters

Product Details

• Width
  48 mm
• Installation distance right/left (active)
  15 mm / 15 mm (≤ 70 °C)
• Installation distance top/bottom
  50 mm / 50 mm (≤ 70 °C)
• Nominal input voltage range
  96 V DC ... 110 V DC
• Climatic class
  3K3 (in acc. with EN 60721)
• Input voltage range
  67.2 V DC ... 154 V DC
• Nominal output voltage
  24 V DC ±1 %
• Depth with alternative assembly
  51 mm
• Ambient temperature (start-up type tested)
  -40 °C
• Inrush current
  < 10 A (typical)
• Nominal output current (IN)
  10 A (-40 °C ... 60 °C)
• Feedback voltage resistance
  35 V DC
• Width with alternative assembly
  122 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Height
  130 mm
• Height with alternative assembly
  130 mm
• Installation distance right/left
  0 mm / 0 mm (≤ 70 °C)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Current consumption
  3.5 A (96 V DC)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
POWER BOOST (IBoost)
12.5 A (-40°C ... 40°C permanent, UOUT = 24 V DC )
Active current limitation
18 A
Power loss nominal load max.
22 W (UIN 110 V DC)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Depth
125 mm
Installation distance top/bottom (active)
50 mm / 50 mm (≤ 70 °C)
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Mains buffering time
typ. 10 ms (96 V DC)
Protective circuit/component
Varistor
Derating
60 °C ... 70 °C (2.5%/K)
Protection against overvoltage at the output (OVP)
< 35 V DC
Connection in series
yes
Maximum power dissipation in no-load condition
4 W (UIN 110 V DC)
Protection class
I
Conductor cross section AWG min.
24
Standard - Safe isolation
DIN VDE 0100-410
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Fast transients (burst)
EN 61000-4-4
Surge voltage load (surge)
EN 61000-4-5
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27210901
ECLASS 5.1
27210900
ECLASS 9.0
27210901
UNSPSC 19.0
39121041
Input fuse
10 A 150 V DC (internal (device protection))
Selective Fuse Breaking (ISFB)
60 A (12 ms)
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 20 mVPP
Insulation voltage input/output
1.5 kV (type test)
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
EMC requirements for noise immunity
EN 61000-6-1
UL approvals
UL/C-UL listed UL 508
Comments
Criterion A
Signal
1 kV (Test Level 2 - asymmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 4.0
27210900
ECLASS 4.1
27210900
ECLASS 5.0
27210900
ECLASS 7.0
27210901
UNSPSC 18.0
39121041
UNSPSC 13.2
39121041
Connection in parallel
Yes, for redundancy and increased capacity
Max. capacitive load
unlimited
Net weight
0.9 kg
MTBF (IEC 61709, SN 29500)
> 1357000 h (25 °C)
Conductor cross section solid max.
2.5 mm²
Stripping length
7 mm
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-4
Discharge in air
15 kV (Test Level 4)
Frequency range
0.15 MHz ... 80 MHz
Conducted interference
EN 61000-4-6
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27210901
ETIM 6.0
EC002046
UNSPSC 21.0
39121041
UNSPSC 20.0
39121041
Peak switching voltages nominal load
< 10 mVPP (20 MHz)
Efficiency
> 92 % (UIN 96 V DC / UOUT 24 V DC)
Connection method
Screw connection
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Screw thread
M3
Standard - Electrical safety
EN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltage
EN 60950-1 (SELV)
Contact discharge
8 kV (Test Level 4)
Input
2 kV (Test Level 4 - symmetrical)
I/O/S
asymmetrical
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27210900
ETIM 7.0
EC002046
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 3 - symmetrical)